fishnfst Posted May 2, 2005 Share Posted May 2, 2005 Got to do some chrono work today and came up with a load that didn't seem to sketchy in my glock. When I got to 9.4 grains I stopped after three rounds due to excessive primer flow. Specs are glock 22 length barrel with kkm comp. Hodgdon HS-7 federal small rifle 124grain winchester fmj's OAL 1.138 will be switching to either zero's or mg's after these are gone... conditions sunny 70 degress farenheit about as close to sea level as you can get.... Started at 7.5 grains right around 1150fps and worked my way up in .2 grain increments 8.9 grains was giving me a 1348 average for twenty rounds with a sd of only 8fps. This is the load that I came up with at the end of the day. I will probaly stick with this or back off .1 grain. Oehler 35p with the screens setup 20 ft from the muzzle... Link to comment Share on other sites More sharing options...
Harmon Posted June 18, 2005 Share Posted June 18, 2005 awesome, can you show a pic of what your normal loads primers look like after firing? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now