Akkid17 Posted June 10, 2016 Share Posted June 10, 2016 Here's what I have found thus far in my search for getting a PCC set up, there are a few out of the box options and then there is always the build it yourself way to go. if anyone has more places or options please add to the list. Stag arms 9mm: http://www.stagarms.com/model-9t Quarter circle 10: http://www.quartercircle10.com/shop/ JP GMR-13: https://www.jprifles.com/1.2.13_GMR-13.php http://www.shootersconnectionstore.com/JP-GMR-13-9mm-P3653.aspx ATI 9mm AR: https://www.americantactical.us/5355/detail.html Sig MPX: http://www.sigsauer.com/CatalogProductList/sig-mpx-sig-mpx.aspx Scorpion EVO: http://cz-usa.com/product/cz-scorpion-evo-3-s1-carbine/ Link to comment
MikeRush Posted June 10, 2016 Share Posted June 10, 2016 CMMG, Rock River, and Colt all make 9mm ARs that use the Colt pattern or modified Uzi mags. I picked up a CMMG lower to use with converted Uzi mags and I like it a lot. Link to comment
aandabooks Posted June 10, 2016 Share Posted June 10, 2016 I'm fairly happy with the PSA AR9 that I picked up slightly used from a member here. Forged dedicated lower for Glock mags. Put on a 15" handguard, JP muzzle break, Timney trigger and changed the stock to a slightly heavier model to mitigate recoil. Came with a Bushnell TRS-25 that I have found to be a good optic. All in for under $1000. Link to comment
M8Stealth Posted June 10, 2016 Share Posted June 10, 2016 Just built a QC10 and very surprised how quiet it is compared to a .223 with similar length barrel. Really soft shooter with normal FM 147gr... It's more like a .22LR. Link to comment
aandabooks Posted June 10, 2016 Share Posted June 10, 2016 What barrel length do you have on that? Nice looking rifle. Link to comment
M8Stealth Posted June 10, 2016 Share Posted June 10, 2016 Built this one with 8.5" barrel. Have started accumulating parts for a 16" after seeing how well this one works. Link to comment
photoracer Posted June 10, 2016 Share Posted June 10, 2016 (edited) Build one or buy, tough decision. Used to have a Beretta CX-4 Storm in 9mm. Never shot it as my club won't allow them. Sold it, then PCC competition popped up. Built one instead. PSA SOCOM LW profile 9mm barrel, QC-10 Glock lower, ramped bolt (CMMG?), DPMS clean upper (no DC or FA), AP Custom 13" CF handguard, Timney single stage trigger, JP 9mm comp, BCM CH, MVB 9mm adjustable stock w/buffer & springs, 2 CTS and 2 Glock 30+ rd. mags, and a C-More Railway. Would have been under $1000 if I had skipped the MVB stock and buffer ($400). but I wanted more weight in the rear to make it swing faster. And also because I wanted a telescoping stock that looked more like an SMG than an AR (similar to MPX stock). Edited June 10, 2016 by photoracer Link to comment
ccoker Posted June 10, 2016 Share Posted June 10, 2016 I REALLY want to get one of these and SBR it.. Link to comment
Rowdy1111 Posted June 11, 2016 Share Posted June 11, 2016 A friend has been running a MPX the last couple of matches impressive little rifle Link to comment
jkrispies Posted June 11, 2016 Share Posted June 11, 2016 Wilson Combat just came out with an interesting looking AR9 PCC and SBR: http://wilsoncombat.com/new/rifle-ar9-carbine.asp#.V1uh-1c4PFI Link to comment
P.E. Kelley Posted June 11, 2016 Share Posted June 11, 2016 So far this Lone Wolf G9 is running fine! Link to comment
ToddKS Posted June 11, 2016 Share Posted June 11, 2016 I just bought an ATI mil sport 9mm. It runs like a top so far. I intentionally fed it mixed mags of HP and RN with mixed OAL. It ran with zero malfunctions. Sent from my SM-N920P using Tapatalk Link to comment
mwx40x40 Posted June 11, 2016 Share Posted June 11, 2016 So far this Lone Wolf G9 is running fine! Patrick any special setup in the stock/buffer tube ? Link to comment
logiztix Posted June 11, 2016 Share Posted June 11, 2016 I never see it mentioned in any of the 'lists', but the Olympic Arms K9-GL I have runs great. It was a special order with a flat-top upper and free-float forend, so I imagine the standard carry handle version they normally sell would have minimal use in PCC. It digests any 9mm I've tried to feed it, is plenty accurate for the task and takes Glock mags. The factory trigger is pretty good as well. Having been in the PCC game for years (with nowhere to play it), I have owned both a Beretta CX-4 Storm and a Kel-Tec SUB 2000. I never reversed the innards of the Beretta, but as a lefty, the K9-GL is WAY less gas and brass in the face than either of the other platforms. I image the newer offerings from other companies are more tailored to 3-Gun, but it is another option if you can track one down. Link to comment
spankymac Posted June 11, 2016 Share Posted June 11, 2016 (edited) ATI is running great with aprrox 2k down range Edited June 11, 2016 by spankymac Link to comment
P.E. Kelley Posted June 11, 2016 Share Posted June 11, 2016 So far this Lone Wolf G9 is running fine! Patrick any special setup in the stock/buffer tube ? Nope, 223 rifle length gear. Or Carbine if that is your stock choice. Link to comment
jon49erfan Posted June 12, 2016 Share Posted June 12, 2016 Sig MPX. I had an AR in 9mm before this and it sucked in comparison. Recoil was significantly more than .223 because of all the reciprocating mass. I wont go back to a blowback gun. Link to comment
jkrispies Posted June 12, 2016 Share Posted June 12, 2016 Sig MPX. I had an AR in 9mm before this and it sucked in comparison. Recoil was significantly more than .223 because of all the reciprocating mass. I wont go back to a blowback gun. If I go PPC, this is my #1 choice right now. Sweet ride... Link to comment
Rangerdug Posted June 12, 2016 Share Posted June 12, 2016 I have the JP, I absolutely love it. I have shot the MPX and it would be my second choice Sent from my iPhone using Tapatalk Link to comment
Brian04rs Posted June 12, 2016 Share Posted June 12, 2016 I've shot my sbr scorpion in a couple steel challenges and it's worked well. Going to try a uspsa match in the near future with it Link to comment
Debob Posted June 12, 2016 Share Posted June 12, 2016 I've been running a Mp5 and it is very hard to not go happy auto on plate racks hahahaha Link to comment
ZackJones Posted June 13, 2016 Share Posted June 13, 2016 Just Right Carbine is what I use - http://www.justrightcarbines.com/JR_Carbine_Products.php Link to comment
jkrispies Posted June 13, 2016 Share Posted June 13, 2016 Sig MPX. I had an AR in 9mm before this and it sucked in comparison. Recoil was significantly more than .223 because of all the reciprocating mass. I wont go back to a blowback gun. If I go PPC, this is my #1 choice right now. Sweet ride... Although thinking about it, a JP would save ne a lot of trouble with mags since I've got plenty of G17 mags on hand. If the JP runs like a top, then It has a definite advantage. Link to comment
Rangerdug Posted June 14, 2016 Share Posted June 14, 2016 Sig MPX. I had an AR in 9mm before this and it sucked in comparison. Recoil was significantly more than .223 because of all the reciprocating mass. I wont go back to a blowback gun. If I go PPC, this is my #1 choice right now. Sweet ride... Although thinking about it, a JP would save ne a lot of trouble with mags since I've got plenty of G17 mags on hand. If the JP runs like a top, then It has a definite advantage. I have and absolutely love my GMR-13. I love the fact that it runs on Glock magazines. The MPX is a great great gun, but mags are not easy to come by. There are no add on for those mags. And only one manufacturer of those mags, and I am not convinced that lancer mags are that great( holding a grudge against their 5.56 mags). As soon Magpul releases their 30rd mags the game is over.Sent from my iPhone using Tapatalk Link to comment
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now