Jump to content
Brian Enos's Forums... Maku mozo!

Light Striking SP01...


Recommended Posts

4 hours ago, cjfung10 said:

I'm not Rowdy but have had experience with both springs. There is a difference if you're at home on your work bench tinkering and doing slow DA pulls.  You'll be a little lighter with your DA and a only slightly lighter in your SA.  But at speed, I would say no. A smooth trigger (by polishing the internals) makes a much bigger difference in the overall feel than going from an 11# to 8.5# main spring.  

If it were me, I'd make sure the gun runs 100% with 11# (because it should with all the goodies/polishing), then if it does, repeat with 8.5#.

Thank you for the information. I have the 11.5# spring sitting on my workbench, but trigger is so nice I hate to screw with it. That said, I need reliability. Not much fun starting every stage with a "no bang". I ordered the CZC firing pin and spring and will give that a try when I get it. 

Link to comment
Share on other sites

3 hours ago, rowdyb said:

there is a difference yes, but i think you'll find it tolerable.

Yep, I put the 11.5# on my Shadow and went to the range to try it out. After a hundred or so rounds I didn't notice the difference. Went through 200 rounds with no light strikes.


Link to comment
Share on other sites

  • 2 years later...
On 11/15/2018 at 4:14 PM, NWfront said:

Can the Rami spring be used with the OEM firing pin in a standard SP01?   I'm planning to run a 13lb or stock S2 hammer spring so I'm not sure I will need the extended firing pin.

I don't see why not. It'll only increase ignition reliability over the stock firing pin spring

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Create New...