Jump to content
Brian Enos's Forums... Maku mozo!

open gun scope


dskd

Recommended Posts

Stay away from the SRS fro NRA, I sell tham and I would not sell you one for that.

Try the new MRO, nice clean dot, a little small, make sure your mount is dead on and you will be fine. As they are designed for a rifle (AR15 specifically) the re is not a lot of adjustment available if the mount is too out of line from the barrel. I had one for about 4 weeks until someone talked one of my staff out of it.

Aimpoint Comp M3 or UltraDot if available. Micro Aimpoint awful, too much parallax up close.

Link to comment
Share on other sites

I like the UltraDot Matchdot II. It has 4 dot sizes and elevation target turret.

Midway USA has them on sale for $229.

http://ads.midwayusa.com/product/590309/ultradot-matchdot-ii-red-dot-sight-30mm-tube-1x-2-4-6-8-moa-dot-2-pattern-reticle-matte?cm_mmc=pf_ci_bing-_-Optics+-+Red+Dot+%26+Holographic+Sights-_-Ultra+Dot-_-590309

Edited by toothguy
Link to comment
Share on other sites

I started using an old PDP3, which worked fine, but switched to an Aimpoint a while ago. I've got a PRO and a CompC3, both are 2MOA, both are fantastic. The only thing I noticed going from the old Tasco to an Aimpoint was the Aimpoint was more forgiving with parallax at 50.

Link to comment
Share on other sites

I started using an old PDP3, which worked fine, but switched to an Aimpoint a while ago. I've got a PRO and a CompC3, both are 2MOA, both are fantastic. The only thing I noticed going from the old Tasco to an Aimpoint was the Aimpoint was more forgiving with parallax at 50.

What is the main differences between the PRO and C3.... I can't see that there are too many just comparing the specs. off the website.

Link to comment
Share on other sites

I started using an old PDP3, which worked fine, but switched to an Aimpoint a while ago. I've got a PRO and a CompC3, both are 2MOA, both are fantastic. The only thing I noticed going from the old Tasco to an Aimpoint was the Aimpoint was more forgiving with parallax at 50.

What is the main differences between the PRO and C3.... I can't see that there are too many just comparing the specs. off the website.

The C3 was on clearance for $240 off :goof: That's why i bought it.

C3 you get a big useless rubber condom that protects it that nobody would use on a pistol, and better battery life. Aside from that I can't tell. The cheaper PRO even came with a nice mount that I saved for future projects.

Link to comment
Share on other sites

I started using an old PDP3, which worked fine, but switched to an Aimpoint a while ago. I've got a PRO and a CompC3, both are 2MOA, both are fantastic. The only thing I noticed going from the old Tasco to an Aimpoint was the Aimpoint was more forgiving with parallax at 50.

What is the main differences between the PRO and C3.... I can't see that there are too many just comparing the specs. off the website.

The C3 was on clearance for $240 off :goof: That's why i bought it.

C3 you get a big useless rubber condom that protects it that nobody would use on a pistol, and better battery life. Aside from that I can't tell. The cheaper PRO even came with a nice mount that I saved for future projects.

That seems to be a succinct response that I can understand..... Thank you sir.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • advertisement_alt
  • advertisement_alt
  • advertisement_alt


×
×
  • Create New...