Distant Thunder Posted January 14, 2016 Share Posted January 14, 2016 So, with Springfield Armory making new product announcements for 2016 how many are hoping that a Range Officer in 40 S&W will be in the mix? I'm guessing they'd really curb demand for the STI Trojan with such a move. Link to comment Share on other sites More sharing options...
ardiver Posted January 14, 2016 Share Posted January 14, 2016 +1 for me in a BIG way Link to comment Share on other sites More sharing options...
Aircooled6racer Posted January 14, 2016 Share Posted January 14, 2016 Hello: I think those that compete only have a small say and are only a small market for them as well. The 9mm would sell since most first time owners can buy 9mm ammo cheap. At least cheaper than 40 or 45. The guys buying 45acp guns are mostly guys who always wanted a 45. I think if they did a limited run say 2000 or so they could test the market and see how they sell. I would buy one in stainless if they made it or a Range Officer Operator in 40. The light rail is a good way to add weight where we want it for competition. Thanks, Eric Link to comment Share on other sites More sharing options...
terrydoc Posted January 14, 2016 Share Posted January 14, 2016 (edited) Obviously Rob L is not pushing .40 at SA. Edited January 14, 2016 by terrydoc Link to comment Share on other sites More sharing options...
Distant Thunder Posted January 14, 2016 Author Share Posted January 14, 2016 Obviously Rob L is not pushing .40 at SA. Let's be real. TGO is pushing WAY past 40 ... sorry Rob. Link to comment Share on other sites More sharing options...
PatJones Posted January 15, 2016 Share Posted January 15, 2016 Only USPSA shooters want a single stack in 40. Given the small number of single stack shooters, the potential market for a 40 cal RO is probably only a few hundred units. Don't hold your breath. Link to comment Share on other sites More sharing options...
FULLMETAL Posted January 15, 2016 Share Posted January 15, 2016 It would be to good to be true. But I do like the RO operator Link to comment Share on other sites More sharing options...
Pizzim Posted January 15, 2016 Share Posted January 15, 2016 (edited) I think the release is/was the RO in hard chrome and the RO "tactical" with a rail Edited January 15, 2016 by Pizzim Link to comment Share on other sites More sharing options...
terrydoc Posted January 15, 2016 Share Posted January 15, 2016 I think the release is/was the RO in hard chrome and the RO "tactical" with a rail hmmm want one wonder hoe long it will take to get to Australia Link to comment Share on other sites More sharing options...
Gooldylocks Posted January 15, 2016 Share Posted January 15, 2016 I think the release is/was the RO in hard chrome and the RO "tactical" with a rail Not hard chrome... Stainless. I want a 40. Link to comment Share on other sites More sharing options...
Paul4895 Posted January 15, 2016 Share Posted January 15, 2016 You can order a single stack .40 through the Springfield Armory custom shop. Not cheap, but they are available....I know because I bought one last year. It's a single stack classic in .40 Link to comment Share on other sites More sharing options...
CaptainOverkill Posted January 15, 2016 Share Posted January 15, 2016 I'd be very interested in a RO in 40, but as was posted above it would only appeal to USPSA shooters (which is a small part of the shooting community). Even then, only to those with any interest in single stack (which is a small part of the USPSA community). Link to comment Share on other sites More sharing options...
Tripod Posted January 15, 2016 Share Posted January 15, 2016 Just not enough market beyond competitive shooters wanting 1911's in 40 S&W but it would be nice wish list item. Link to comment Share on other sites More sharing options...
Distant Thunder Posted January 15, 2016 Author Share Posted January 15, 2016 Yeah, I get that it would not be a huge market for Springfield Armory, but I had the chance to look over a Sig Max 40 a couple days ago and came away surprisingly unimpressed. I just thought SA could do a better job for the competition shooters on a budget using the RO for a base platform to keep costs down. Link to comment Share on other sites More sharing options...
PatJones Posted January 16, 2016 Share Posted January 16, 2016 ...Even then, only to those with any interest in single stack (which is a small part of the USPSA community). And perhaps only those single stack shooters that also shoot limited. Nothing wrong with 45 if you're not looking to share 40 cal ammo with another pistol. Link to comment Share on other sites More sharing options...
poolguy Posted January 16, 2016 Share Posted January 16, 2016 What does it take to convert a RO 9 into a 40? New barrel, bushing, and link. Extractor. Breach face recut. What else? Link to comment Share on other sites More sharing options...
Distant Thunder Posted January 16, 2016 Author Share Posted January 16, 2016 ...Even then, only to those with any interest in single stack (which is a small part of the USPSA community). And perhaps only those single stack shooters that also shoot limited. Nothing wrong with 45 if you're not looking to share 40 cal ammo with another pistol. Well ... again, let's look at this from the perspective of a budget minded and/or new shooter. They're probably not going to be reloading (at least not at first) so they're going to be buying factory ammo. Two of the most widely available 40 offerings are the Winchester USA (white box) 165gr. and Blazer Brass 180 gr. in 100 and 50 round boxes respectively. They come in at around 175 - 177 power factor. Not ideal, but pretty manageable. The Winchester USA and Blazer Brass 230 gr. 45 will both produce over 190 power factor. Uhmmm, which would you prefer to shoot over the course of a match? Which of these costs less to shoot? When our budget/new shooter does start to reload which will cost less to produce? Yup, the 40 wins on all these counts. Now before everyone starts rolling their eyes and shaking their heads, look in a Range Officer's case and what do you see besides the gun? A holster, a double mag pouch and a cleaning/bore brush. Granted, a rather rudimentary holster and mag pouch, but something to get started with nonetheless. I still think a Range Officer in 40 makes pretty good sense for the beginning shooter. They'd have a sound platform to start with and one that wouldn't break the bank to upgrade as they'd wish later on. If any company could pull this off my money's on Springfield Armory. Link to comment Share on other sites More sharing options...
Distant Thunder Posted January 16, 2016 Author Share Posted January 16, 2016 What does it take to convert a RO 9 into a 40? New barrel, bushing, and link. Extractor. Breach face recut. What else? I contacted Deb at Springfield Armory's custom shop and she said we'd be looking at a whole new top end at a cost of around $1,200.00 to $1,300.00. Kinda kicks in the teeth on a budget shooter. Link to comment Share on other sites More sharing options...
Chutist Posted January 16, 2016 Share Posted January 16, 2016 I think the .40 would be popular in LE circles also... Might be more of a market than anybody thinks. Link to comment Share on other sites More sharing options...
poolguy Posted January 16, 2016 Share Posted January 16, 2016 What does it take to convert a RO 9 into a 40? New barrel, bushing, and link. Extractor. Breach face recut. What else?I contacted Deb at Springfield Armory's custom shop and she said we'd be looking at a whole new top end at a cost of around $1,200.00 to $1,300.00. Kinda kicks in the teeth on a budget shooter.why would it require a new top end? Link to comment Share on other sites More sharing options...
poolguy Posted January 16, 2016 Share Posted January 16, 2016 Just curious as I want to build out a SS to run the same ammo as my lim setup. I have 9 and .45 SS guns. My understanding is 9 and 40 can use same ejector. A 9 frame is already cut for the ramp. I'm sure I am missing something. Link to comment Share on other sites More sharing options...
Distant Thunder Posted January 16, 2016 Author Share Posted January 16, 2016 Shocked the living crap outta me too especially since I mentioned in my e-mail that I was asking about such a conversion on a Range Officer in 9mm. I was hoping they'd come back saying they could just modify the existing slide, fit a new barrel, bushing, ejector, extractor, recoil spring, but I almost spit out my coffee when I got the reply. And it was Dean & Deluca coffee, not Folgers so I'd have been REALLY upset. Do the math and it doesn't make sense on a gun costing a WHOLE lot less than the conversion would. Makes the cost of a Range Officer in 40 even more budget friendly, doesn't it? Link to comment Share on other sites More sharing options...
Gooldylocks Posted January 16, 2016 Share Posted January 16, 2016 It seems strange to me that there are so many companies out there that make 1911's, yet so few that make them in 40. I mean honestly, what are your choices? STI, Sig or a custom? I know Dan Wesson occasionally will do a run of 40's, and your wish (and dollar signs) is their command when it comes to custom guns, but it is strange to me. Rock Island makes a good gun for the money and they make a whole bunch of 40's, but they all have bull barrels! I guess I'm just saying it's surprising to me that there are so many companies but so few choices. Link to comment Share on other sites More sharing options...
NickBlasta Posted January 16, 2016 Share Posted January 16, 2016 It seems strange to me that there are so many companies out there that make 1911's, yet so few that make them in 40. I mean honestly, what are your choices? STI, Sig or a custom? I know Dan Wesson occasionally will do a run of 40's, and your wish (and dollar signs) is their command when it comes to custom guns, but it is strange to me. Rock Island makes a good gun for the money and they make a whole bunch of 40's, but they all have bull barrels! I guess I'm just saying it's surprising to me that there are so many companies but so few choices. Because while we desire guns in .40 for our gun games, the majority of people who buy these 1911s (read: non-competitors) do not want a gun in .40. Link to comment Share on other sites More sharing options...
jcc7x7 Posted January 16, 2016 Share Posted January 16, 2016 uspsa is to small a market for them to address Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now