JGus Posted January 2, 2016 Author Share Posted January 2, 2016 CZ85Combat, are you shooting that in Open division? Link to comment Share on other sites More sharing options...
furyalecto Posted January 2, 2016 Share Posted January 2, 2016 CZ 75b, because a division only for plastic guns is stupid. ETA: Yes, it makes the weight requirement. Details please? Link to comment Share on other sites More sharing options...
JGus Posted January 2, 2016 Author Share Posted January 2, 2016 (edited) According to CZ USA the CZ 75B weighs 2.2 lbs, or 35.2 ounces. How would you make weight with an optic? Mill enough off the slide to make weight with an optic? Edited January 2, 2016 by JGus Link to comment Share on other sites More sharing options...
sperman Posted January 2, 2016 Share Posted January 2, 2016 (edited) Stock C Z 75B, out of the box (stock mag, sights.) - 34.3 oz Remove sights (front and rear) - 34.1 oz Mill Slide - 33.4 oz Install Jpoint Optic - 34.0 oz Replace factory mag with Shadow mag - 34.5 oz I'm not sure why the CZ USA site lists it at 35.2. The USPSA production list is accurate at 34.3 oz. Edited January 2, 2016 by sperman Link to comment Share on other sites More sharing options...
JGus Posted January 2, 2016 Author Share Posted January 2, 2016 (edited) I decided to go with the Sig P320 with large full size grip. I had a Burris Fastfire 2 on it in this picture. I have a Burris FF3 on order to replace it. It's on a dovetail mount. I may eventually get the slide milled. But right now it's all stock (other than optic) and working really well. After 300 rds the trigger pull (according to 10 pulls on my RCBS trigger scale) is 7-7.5 lbs. Going to install a GGI drop in trigger kit once they are available. Would like to get the trigger around 3-4 lbs. Bruce Gray said the drop in trigger kit will debut at Shot Show this month. Edited January 2, 2016 by JGus Link to comment Share on other sites More sharing options...
CZ85Combat Posted January 2, 2016 Share Posted January 2, 2016 CZ85Combat, are you shooting that in Open division? It will be shot in Carry Optics. Slide is milled 0.250 deep. With a 10 round mag 34.4oz, 16 round mag with plastic base plate 34.7oz Link to comment Share on other sites More sharing options...
bockerSV Posted January 2, 2016 Share Posted January 2, 2016 I have an M&P pro sitting around that I've been thinking of using for CO. I've been trying to find a pro core slide to buy instead of milling the one I have. Link to comment Share on other sites More sharing options...
blschultz Posted January 3, 2016 Share Posted January 3, 2016 I'm thinking bout setting up a CO gun. My main concern is how are the optics holding up to the torture of going for a violent ride with every shot. What are some round counts you guys have and what are the optics doing. Link to comment Share on other sites More sharing options...
sperman Posted January 3, 2016 Share Posted January 3, 2016 (edited) CZ85Combat, are you shooting that in Open division? It will be shot in Carry Optics. Slide is milled 0.250 deep. With a 10 round mag 34.4oz, 16 round mag with plastic base plate 34.7oz I'm calling BS on that one. The accu-shadow is listed at 42 oz on the USPSA production gun list. You're running a heavier optic and heavier girps than I have on my 75b. Milling the slide for the optic isn't going to remove 7 oz. Edited January 3, 2016 by sperman Link to comment Share on other sites More sharing options...
trgt Posted January 4, 2016 Share Posted January 4, 2016 CZ85Combat, are you shooting that in Open division? It will be shot in Carry Optics. Slide is milled 0.250 deep. With a 10 round mag 34.4oz, 16 round mag with plastic base plate 34.7oz I'm calling BS on that one. The accu-shadow is listed at 42 oz on the USPSA production gun list. You're running a heavier optic and heavier girps than I have on my 75b. Milling the slide for the optic isn't going to remove 7 oz. I believe he's doing similar to what you mentioned you'll try with a CZ75B, but with a CZ85 Combat instead. See post #42 with milling on that. I think he confused the thread by posting a pic of a delta point with 8000 rounds on Accu top end in response to someone wanting to know if RMR could survive slide ride. Link to comment Share on other sites More sharing options...
sperman Posted January 4, 2016 Share Posted January 4, 2016 That would make more sense. The photo of the Shadow confused me. Link to comment Share on other sites More sharing options...
zhunter Posted January 4, 2016 Share Posted January 4, 2016 (edited) I think IF you mill for the sight... 85C 75B 75 Compact All make weight, of course the P-07 and 09 make it no problem. Edited January 5, 2016 by zhunter Link to comment Share on other sites More sharing options...
zombywoof Posted January 4, 2016 Share Posted January 4, 2016 Link to comment Share on other sites More sharing options...
alma Posted January 6, 2016 Share Posted January 6, 2016 Interim set up until the SIG Romeo 1 MRDS is available. Link to comment Share on other sites More sharing options...
sperman Posted January 7, 2016 Share Posted January 7, 2016 Interim set up until the SIG Romeo 1 MRDS is available. Is that legal in CO? 13 Optical/electronic sights permitted Yes, must be attached directly to slide between rear of slide and ejection port. Link to comment Share on other sites More sharing options...
alma Posted January 7, 2016 Share Posted January 7, 2016 Interim set up until the SIG Romeo 1 MRDS is available. Is that legal in CO? 13 Optical/electronic sights permitted Yes, must be attached directly to slide between rear of slide and ejection port. It's attached there. This mount fits into the rear sight dovetail. It doesn't say it can't overhang. Link to comment Share on other sites More sharing options...
coloradoshooter5 Posted January 9, 2016 Share Posted January 9, 2016 Anyone tried with a Witness P yet? Link to comment Share on other sites More sharing options...
CZ85Combat Posted January 10, 2016 Share Posted January 10, 2016 (edited) All finished and ready for Carry Optics. CZ 85 Combat with Deltapoint Pro 34.7oz Edited January 10, 2016 by CZ85Combat Link to comment Share on other sites More sharing options...
zhunter Posted January 10, 2016 Share Posted January 10, 2016 All finished and ready for Carry Optics. CZ 85 Combat with Deltapoint Pro 34.7oz Can you post a photo looking down the slide, I'd like to see the width of slide/optic comparison. Many sights are too wide for 75 series CZ's to get the sight's mounting screws safely in the milled slide. Link to comment Share on other sites More sharing options...
CZ85Combat Posted January 10, 2016 Share Posted January 10, 2016 (edited) Their is lots of room for the DeltaPoint Pro. Trigger pull DA 5 lb 14.5oz, SA 2lb 6.7oz Edited January 10, 2016 by CZ85Combat Link to comment Share on other sites More sharing options...
zhunter Posted January 10, 2016 Share Posted January 10, 2016 Thanks I use a Doctor Sight What is the measurement center to center of your screws? Link to comment Share on other sites More sharing options...
CZ85Combat Posted January 10, 2016 Share Posted January 10, 2016 0.550" Link to comment Share on other sites More sharing options...
zhunter Posted January 10, 2016 Share Posted January 10, 2016 0.550" Thanks, I'm out of town working for a while, but I'll check mine when I get home Link to comment Share on other sites More sharing options...
Yibomb Posted January 23, 2016 Share Posted January 23, 2016 Glock now has Gen4 19 and 17 with MOS Link to comment Share on other sites More sharing options...
xpd54 Posted January 24, 2016 Share Posted January 24, 2016 Either one of these. Yes the 229 makes weight by an easy margin. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now