Stony Lane Posted December 21, 2015 Share Posted December 21, 2015 Beretta (M9A1) 92 Compact with rail and a Burris Fastfire III. Added an extended mag release, steel trigger, Elite II hammer and steel safety lever. [ = 34.1 oz. with full size magazine and spacer ] Link to comment Share on other sites More sharing options...
JGus Posted December 21, 2015 Author Share Posted December 21, 2015 (edited) Beretta (M9A1) 92 Compact with rail and a Burris Fastfire III. Added an extended mag release, steel trigger, Elite II hammer and steel safety lever. [ = 34.1 oz. with full size magazine and spacer ] Are you using a dovetail mount for the Fastfire? I ordered a dovetail mount for my Fastfire II and full size Sig P320. It's the same one used for the Beretta, Sig P226 and some others. Hope it will be tight and secure after install and Loctite. Edited December 22, 2015 by JGus Link to comment Share on other sites More sharing options...
Stony Lane Posted December 22, 2015 Share Posted December 22, 2015 JGus, The 92 mount (the piece that slid in the dovetail) was very loose. I slightly filed down the one labeled for the Cougar (two came in the package). I just got it shiny on the bottom and sides and taped it in (with screws in place to prevent damage to the threads). The whole unit is very tight. Link to comment Share on other sites More sharing options...
spencerattix Posted December 23, 2015 Share Posted December 23, 2015 The cz custom shop has a P09 all suited up and ready to go for CO. That's my next purchase. Link to comment Share on other sites More sharing options...
ac4wordplay Posted December 23, 2015 Share Posted December 23, 2015 My Production-compliant gear that isn't working quite right and needs to be function tested Link to comment Share on other sites More sharing options...
kamann Posted December 26, 2015 Share Posted December 26, 2015 G17 with c-more sts in dovetail mount. I already know I want my slide milled to get the dot lower. Link to comment Share on other sites More sharing options...
cody6477 Posted December 27, 2015 Share Posted December 27, 2015 Haven't made up my mind to try CO yet, but I have an XDM already, so maybe... Link to comment Share on other sites More sharing options...
9x45 Posted December 27, 2015 Share Posted December 27, 2015 G17L Major Open 9, but I carry a G31... Which also makes major with 125's going 1,420 fps for reloads, duty caps at 1,600 fps..... Why? Because the Major power floor is to low, needs to go back to 180. Link to comment Share on other sites More sharing options...
9x45 Posted December 27, 2015 Share Posted December 27, 2015 I didn't think the G17L was production legal. Hopefully Glock will bring the G17 MOS to the US next year. If they do I'll get one of those and use it. If they don't I'll probably buy a G34 MOS. Yes, but I can run big sticks in Open. Restricting carry optics to 10 rounds sucks, should be at least original flush fit magazine capacity. I'm ok with only 17 rounds in a Glock. Link to comment Share on other sites More sharing options...
1911A12011 Posted December 27, 2015 Share Posted December 27, 2015 What's a general cost to have a slide milled for an optic? The average cost I've seen is $150. Link to comment Share on other sites More sharing options...
tarosean Posted December 27, 2015 Share Posted December 27, 2015 (edited) G34 MOS with DP Pro + a lot of other legal mods. Still seriously suck at this division though, (2 matches-limited to no practice) seems like everything is in slowmo waiting on the sight. Edited December 27, 2015 by tarosean Link to comment Share on other sites More sharing options...
Southpaw Posted December 28, 2015 Share Posted December 28, 2015 Still seriously suck at this division though, (2 matches-limited to no practice) seems like everything is in slowmo waiting on the sight. 3 matches with mine so far and it's not an easy transition for me either. Takes a while sometimes to find the dot. On close targets I've mostly been just shooting through the window without seeing the dot; getting surprisingly good hits that way, but need to work on picking up the dot faster. While it's hard to compare scores with few shooters in the division, I think I'm actually shooting it comparatively better than I ever did in Production though. Also, so far every match I'm getting quite a few people coming up to me asking questions about my set up. Seems there's a lot more interest in Carry Optics than can be counted just from the number of people currently shooting it. A lot of folks are interested in trying it out. Off topic, but is there anywhere to check classifier scores for Carry Optics? Seems classifiercalc doesn't have the HHFs, it was just giving me the same % as Production. Link to comment Share on other sites More sharing options...
tarosean Posted December 28, 2015 Share Posted December 28, 2015 (edited) Off topic, but is there anywhere to check classifier scores for Carry Optics? Seems classifiercalc doesn't have the HHFs, it was just giving me the same % as Production. I use the one at AZ Shooters. https://azshooters.org/ It nailed my pathetic High C in CO in my first match. second match classifier was zero or hero so it wont be showing up... lol I am doing far worse than I ever did in production. Granted some of it is retardation going from LTD and forgetting the whole 10rds thing. Edited December 28, 2015 by tarosean Link to comment Share on other sites More sharing options...
pskys2 Posted December 28, 2015 Share Posted December 28, 2015 I've never been able to shoot with both eyes open, but it seems doing so with CO does help pick up that first shot. Did some testing and for now it is slower, by about .2. Did a bit of practice and using both eyes was finally able to get the times down. Link to comment Share on other sites More sharing options...
Southpaw Posted December 28, 2015 Share Posted December 28, 2015 Off topic, but is there anywhere to check classifier scores for Carry Optics? Seems classifiercalc doesn't have the HHFs, it was just giving me the same % as Production. I use the one at AZ Shooters. https://azshooters.org/ It nailed my pathetic High C in CO in my first match. second match classifier was zero or hero so it wont be showing up... lol I am doing far worse than I ever did in production. Granted some of it is retardation going from LTD and forgetting the whole 10rds thing. Thanks. Although a bit disappointing, looks like classifiercalc has the wrong HHF for the classifier I shot for all divisions. It had me at 91%, I thought I shot it pretty well, but that did seem high Link to comment Share on other sites More sharing options...
phoenixsomd Posted December 28, 2015 Share Posted December 28, 2015 I already had a Glock 34 and a FFIII so I acquired a mount from Strike Industries that uses the factory dovetail. I have not shot a match with it yet just dry and live fire practice. I shoot with both eyes open so that aspect was not to get used to. It defintely doesn't point like the stock G34 due to the FFIII height - that's been the most difficult adjustment. Link to comment Share on other sites More sharing options...
CZ85Combat Posted December 30, 2015 Share Posted December 30, 2015 (edited) It's coming together, CZ85 Combat with Deltapoint Pro [/url]">http:// [/url]">http:// Edited December 30, 2015 by CZ85Combat Link to comment Share on other sites More sharing options...
xpd54 Posted January 1, 2016 Share Posted January 1, 2016 Sig 229R for now. Once my P07 comes back from L&M I'll use it. Link to comment Share on other sites More sharing options...
Round_Gun_Shooter Posted January 1, 2016 Share Posted January 1, 2016 Sig 229R for now. Once my P07 comes back from L&M I'll use it. Sig 229 here also. Just sent a spare slide put to be machined. I will probably use the 40 S&W barrel rather than the 357SIG Link to comment Share on other sites More sharing options...
GOF Posted January 1, 2016 Share Posted January 1, 2016 Has anyone been able to get a reflex sight to run more than 1,000 rounds without dying when slide mounted? Link to comment Share on other sites More sharing options...
BritinUSA Posted January 1, 2016 Share Posted January 1, 2016 DeltaPoint... It has run for 18 months on my XDM. Link to comment Share on other sites More sharing options...
zhunter Posted January 1, 2016 Share Posted January 1, 2016 Has anyone been able to get a reflex sight to run more than 1,000 rounds without dying when slide mounted? I've got 4-5K on mine, not a problem. We use Doctor Sight Plus II Guy I got it from has 100,000+ on a Major 9 gun. Doctor sight is great, always on, no on/off buttons or switches Link to comment Share on other sites More sharing options...
xpd54 Posted January 1, 2016 Share Posted January 1, 2016 Has anyone been able to get a reflex sight to run more than 1,000 rounds without dying when slide mounted? Yes. My RMR has a couple thousand on it already. Link to comment Share on other sites More sharing options...
atbarr Posted January 1, 2016 Share Posted January 1, 2016 Has anyone been able to get a reflex sight to run more than 1,000 rounds without dying when slide mounted? I have a RMR on my G19 and G21. Over 3,000 with the G21, and way over 1,000 on the G19. Link to comment Share on other sites More sharing options...
CZ85Combat Posted January 1, 2016 Share Posted January 1, 2016 8000+ rounds on this one. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now