TightLines Posted November 30, 2015 Share Posted November 30, 2015 First off, I don't compete so making PF is not a specific concern. I'm shoot for fun and have been using Xtreme 230 gr RN for most of my .45 shooting. Have a couple of boxes of their 200gr SWCs but they've proven problematic in all but one 1911. Some research after purchasing them showed that the Xtreme 200gr SWC profile seems to be especially problematic feeding in 1911s (more so than other 200gr SWC profiles). Looking to place an order for Bayou Bullets (10% off today) and am considering getting some of the 200gr RN bullets. I'm hoping they'll feed as reliably as 230gr RN with the lower cost of 200gr. Just wondering why more people don't shoot (or at least discuss) 200gr RN bullets? Any input? Link to comment Share on other sites More sharing options...
ParaGunner Posted November 30, 2015 Share Posted November 30, 2015 Most use 230grn bullets to make pf with less powder. Link to comment Share on other sites More sharing options...
Nickb45 Posted November 30, 2015 Share Posted November 30, 2015 I shoot the 200 grain RN from Bayou. I really like them. They don't lead, don't smoke much and they are consistent, add great customer service and fast shipping to the list. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
jkrispies Posted December 1, 2015 Share Posted December 1, 2015 I shoot 200gr round nose from Beat Creek. I used SWC from various makes for awhile but found these and figured they would feed better though I never had much of a problem with the SWC's. Several thousand rounds later I'm sticking with them. These feel better than 230 and accuracy seemed to suffer with 185. Might just be me and my gun though. Link to comment Share on other sites More sharing options...
TightLines Posted December 2, 2015 Author Share Posted December 2, 2015 Thanks for the help guys. Ordered some 200gr RN from Bayou and we'll see how they work out. Link to comment Share on other sites More sharing options...
mont1120 Posted December 2, 2015 Share Posted December 2, 2015 I shoot either Montana Golds or Blue Bullet, but have always gone back to the 230 grains for the above mentioned reasons, less recoil to meet power factor is certainly one. I have found , and this is only in my Kimber and SA, that 200 grain bullets have caused more jams then the 230. I have tried adjusting OAL, but still had the occasional lock up. Not a consistent issue, but pretty fatal in a match. I need all the points I can get. SWC is even worse, so it really depends on the individual firearm. Link to comment Share on other sites More sharing options...
njl Posted December 4, 2015 Share Posted December 4, 2015 (edited) I've shot 200gr RNFP from Bayou and 200gr RN from Black and Blue. I mostly shoot them in Glocks though. If you don't care about PF, you can make some really low recoiling .45acp using 185gr or 200gr bullets. BTW...I never tried Bayou's 200gr RN because I was worried the step/shoulder would cause SWC-like feeding issues and couldn't find anyone saying they were using them in Glocks. Edited December 4, 2015 by njl Link to comment Share on other sites More sharing options...
TightLines Posted December 5, 2015 Author Share Posted December 5, 2015 I'll report back when I get a few rolled and down range. Sent from my SAMSUNG-SGH-I317 using Tapatalk Link to comment Share on other sites More sharing options...
bwxmas Posted December 17, 2015 Share Posted December 17, 2015 (edited) Like I said in the other thread, you cannot do better than this guy. His flat points seem to shoot the best in my pistol, but the SWC are close. No, I am not related to his business. Just good bullets at great prices, and fast shipping http://www.summersenterprisesllc.com/default.asp Edited December 17, 2015 by bwxmas Link to comment Share on other sites More sharing options...
Jim Watson Posted December 17, 2015 Share Posted December 17, 2015 I have shot a fair number of those 200 gr roundnose with shoulder and they do well in most guns. I have one that will not feed them at all and another doubtful. I will probably go to plain roundnose instead of those or SWCs the next batch I buy. Link to comment Share on other sites More sharing options...
Aircooled6racer Posted December 21, 2015 Share Posted December 21, 2015 Hello: Look at the bullets from David Long at Precision moly bullets in Texas. I just bought some more of his 200 gr SWC and have loaded thousands of his 200 grain RNFP bullets. They feed and are very accurate as well. His SWC are working great with those big holes I can actually see at 50 yards. Thanks, Eric Link to comment Share on other sites More sharing options...
MrRick Posted December 22, 2015 Share Posted December 22, 2015 Never had any issues out of any of my 1911s with Xtreme 200 SWC. Even my CZ97 runs them fine. I quit buying them because the XDM I had didn't like them. I did found out that OAL is very important with SWC though. Link to comment Share on other sites More sharing options...
thermobollocks Posted December 22, 2015 Share Posted December 22, 2015 The only 200 grain RNs I've shot have a lip on them that causes malfunctions in the same way as many wadcutters. With the RN, you should be able to load them however long your gun prefers, and have them feed the same as a 230. For max power factor gaming, people like 230s. There's a cost of lead difference between 200 and 230, which generally doesn't enter into my preferences, but for some it does. Get a few cases of whatever your gun eats and go nuts. Link to comment Share on other sites More sharing options...
Aircooled6racer Posted December 22, 2015 Share Posted December 22, 2015 Hello: The Precision moly bullets that I use I load the 200 grain RN to 1.235" OAL and the 200 grain SWC to 1.260". Both feed fine in my STI Spartan and Sig Max. Thanks, Eric Link to comment Share on other sites More sharing options...
BK63 Posted December 27, 2015 Share Posted December 27, 2015 I've shot thousands and thousands of 200 grain RN as well as 230, hard cast from Missouri Bullet for years in many different guns from Glocks with after market barrels, to 1911's to some Taurus model 45's I have. Never had an issue with any of them feeding. Check out Missouri Bullet and there is also another site called Badman bullets that sell batches of 25 round samples to try for cheap. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now