rustybayonet Posted November 3, 2015 Share Posted November 3, 2015 I just picked up a pacific rifle 2 die set for $10. This has the seat and crimp in one die. Can I make that die just crimp or just seat, I would prefer to seat with it and get the crimp die from brian when I order the quik change. So can I adjust the die to only seat? Link to comment Share on other sites More sharing options...
dillon Posted November 3, 2015 Share Posted November 3, 2015 No problem in adjusting the seat/crimp die to seat only. Put a sized, empty case into station 3, and pull the handle down. With the handle down and the case lifted up, screw the seat die down until it stops against the case, then back it up 1/4 turn. Finger tighten the die body lock ring. Now adjust the bullet seat stem in the top of the die to seat the bullet to the desired depth. For best concentricity, tighten both die lock rings with a loaded cartridge in the die. Link to comment Share on other sites More sharing options...
rustybayonet Posted November 3, 2015 Author Share Posted November 3, 2015 Thanks, Now to order the rest of the parts!!!! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now