Jump to content
Brian Enos's Forums... Maku mozo!
dshooter3

Red Dot Mounts cross reference

Recommended Posts

What mounts will work for multiple brands of Reflex Sights. For example Are Doctor and J-point interchangeable ect . Will the mount work with an adapter from __________ manufacturer . The sights that I am wondering about are listed below.

RTS2

STS

RMR

Doctor

J-point

Delta Point

SIG Romeo 1 and 2

Vortex Razor and Venom

Share this post


Link to post
Share on other sites

The Docter and the J-Point use different mounts. When I enquired, I was told the Delta Point also used the J-Point configuration. The Burris FastFires fit on a Docter mount and everything aligns and works. The C-More red dots use their own mounting system. The screw holes are much closer together than on the older mounts. That makes them easier to directly mount on a slide.

Share this post


Link to post
Share on other sites

I just bought a Razor and it included a shim plate so the sight could be used on Fastfire type mounts. Only difference is Razor used slightly larger screws.

The Venom is same as Burris Fastfire.

Share this post


Link to post
Share on other sites

Does anyone have hole pattern measurements for any of these? I would like to compare with the SIG Romeo.

The report I heard is that the Romeo 1 is similar to the Delta Point but if someone can share the measurements of Delta point mounting pattern I can confirm.

Edited by alma

Share this post


Link to post
Share on other sites

Yes!

If anyone have them, I need to?????

I have to drill the slide and I need the holes spacing fro C-More and other

Steve

Edited by Steve001

Share this post


Link to post
Share on other sites

Does anyone using the Burris FF and Docters just use the dovetail to mount them or have you added the third hole and tapped the slide for a more secure mount?

Share this post


Link to post
Share on other sites

I have several FF3s mounted in the dovetail slots and one mounted directly to a modified 1911 slide. They all work perfectly.

A note to 1911 shooters: If you have your slide milled for a dot, make absolutely sure your smith mills the slide so the dot mounting surface is parallel to the bore axis when in battery. If he mills it parallel to the bottom of the slide, you will not have enough adjustment to zero if using a Docter, and probably if using a FF3.

Even though you are supposed to cut the dovetails on a 1911 slide at about a 1 degree down angle to match the axis of the bore in battery, many manufacturers don't. If you have one of those slides, you will have to shim the mount to zero.

Edited by zzt

Share this post


Link to post
Share on other sites

We made a list at Adams arms while making our voodoo innovations Glock slides we made 5 separate footprint cuts to accommodate the majority of mini red dots. Cuts 2 & 4 accommodate multiple optics

 

1- Trijicon RMR (no other)

2- Burris ff, Vortex venom and viper, dr optic

3- Leupold delta 

4-vortex razor, cmor sts & cts

5- Eo tech/L3 MRDS

 

hope that helps 

Share this post


Link to post
Share on other sites

I found a nice list on optics planet in the how to mount red dot sight handgun page.

Share this post


Link to post
Share on other sites

I have an ADE RD3-009-2 that I am wanting to mount to a Ruger SR9e. The Ruger has 1911 Novak cut  and I’m rear sights and I’m looking for a mount to fit it. ADE does not make a mount for Novak cut sights and I’m just trying to see if it is doable or if I need to just pony up and get a whole new red dot and mount. 

 

Side note, I know everything I just listed is on the cheap end but I like the pistol and the red dot was free from a buddy. 

 

Thank y’all!

Share this post


Link to post
Share on other sites

Your ADE red dot should have the same mounting pattern as Burris ff3.

Sent from my SM-G975U using Tapatalk

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...