stardust tommy Posted September 1, 2015 Share Posted September 1, 2015 wat is the best way to get a 3lbs triggerpull (for certain competitions) I've installed a competition hammer and put a verry little secundairy angle on the sear so there is no creep... I like to keep this. I prefer to increase the pretravel and not increasing the mainspring tension I see the TS frame has the cutout for a DA/SA triggerspring, can I use a SP01 triggerreturnspring? gr Tom Link to comment Share on other sites More sharing options...
PRanta Posted September 1, 2015 Share Posted September 1, 2015 Instal a second sear spring. Sear cage needs some grinding to fit two springs. Another option is heavier main spring. Link to comment Share on other sites More sharing options...
PrimaryBruce Posted September 1, 2015 Share Posted September 1, 2015 Easiest two things that come to mind is heavier mainspring or heavier sear spring. Link to comment Share on other sites More sharing options...
himurax13 Posted September 1, 2015 Share Posted September 1, 2015 You can install the extra power trigger return spring from CZ customs and maybe try installing a 20 lb hammer spring. I am not sure why you would want to go that route though. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now