jddbugman Posted June 1, 2015 Share Posted June 1, 2015 The case feeder on my 1050s is having issue with 9mm brass. I am having the case geting stuck and not dropping down the shute.They are jamming between the door and the shellplate. What can I do Link to comment Share on other sites More sharing options...
UncleTK Posted June 1, 2015 Share Posted June 1, 2015 Do you have the old style case feeder that needs the white insert that you put in the clear funnel Link to comment Share on other sites More sharing options...
jddbugman Posted June 1, 2015 Author Share Posted June 1, 2015 No I got the new one on a 1050s Link to comment Share on other sites More sharing options...
Henny Posted June 1, 2015 Share Posted June 1, 2015 That was happening for me too. I was running my case feeder on the fast position. I started running it on the slow position and haven't had any problems since. Link to comment Share on other sites More sharing options...
Scootertheshooter Posted June 18, 2015 Share Posted June 18, 2015 (edited) I have the same issue on high or low speed and it's the new version. Bench is mounted to the wall so it's sturdy as hell. I actually have two 650's with 2 case feeders and both do it. It can de nine or 38 still happens Edited June 18, 2015 by Scootertheshooter Link to comment Share on other sites More sharing options...
Sarge Posted June 18, 2015 Share Posted June 18, 2015 Try searching? http://www.brianenos.com/forums/index.php?showtopic=171758&view=findpost&p=2292812&hl=%2Bjam+%2Bin+%2Bcase+%2Bfeeder http://www.brianenos.com/forums/index.php?showtopic=209716&view=findpost&p=2331281&hl=%2Bjam+%2Bin+%2Bcase+%2Bfeeder http://www.brianenos.com/forums/index.php?showtopic=209758&view=findpost&p=2331948&hl=%2Bjam+%2Bin+%2Bcase+%2Bfeeder http://www.brianenos.com/forums/index.php?showtopic=211773&view=findpost&p=2367681&hl=%2Bjam+%2Bin+%2Bcase+%2Bfeeder Link to comment Share on other sites More sharing options...
Brassaholic13 Posted June 18, 2015 Share Posted June 18, 2015 Welcome to the club to which Dillon denies an issue! Link to comment Share on other sites More sharing options...
Boxerglocker Posted June 18, 2015 Share Posted June 18, 2015 (edited) The one and only time I've had this issue discussed is prior to adjusting the metal tab as show in the pic. I wanted to add that, when I first got my case feeder plate. I noticed a sharp flashing on the cutouts, a little swipe with 500 grit sandpaper wrapped in a dowel smoothed those out. Edited June 18, 2015 by Boxerglocker Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now