Jump to content
Brian Enos's Forums... Maku mozo!

Ideas for the Glock Pistol, more power and accuracy


R  BROWN

Recommended Posts

I have never started a thread on this forum so I hope this works.

If I am doing something wrong by posting this please delete it.

I posted this on a different forum and they said it would be better

on here.

If you came up with some ideas to improve accuracy and get more
power from the Glock pistols and the ar-15 what company would you
get to produce the products?

A few months ago I talked to JR at Lone Wolf about my ideas and
he liked them but was just too busy, also talked to him about some of the
ideas on the ar-15, so now I really need to find a
company or some pardners to form a company.

I have been testing the Glock thing for over two years and am almost ready
for production.

9mm major will be no problem with this, and at a lower pressure, and it will

also add to most calibers in the Glock pistol.

Link to comment
Share on other sites

I talked to Lone Wolf about my ideas and

he liked them but was just too busy so now I really need to find partners to form a company.

I have been testing the Glock thing for over two years and am almost ready for production

Since you didn't mention what your ideas are, I'd suggest:

1. waiting until you're ready for production

2. talking to more of the gunsmiths working on customizing Glocks & AR's

(it's just possible that someone else already has a patent on "your idea".

or

3. explaining the basic concepts of "accurizing and increasing power" of a Glock

right here on this Forum, and see what reaction you get.

And you don't have to pay me a penny for this piece of advice. :cheers:

Link to comment
Share on other sites

9mm major will be no problem with this, and at a lower pressure, and it will

also add to most calibers in the Glock pistol.

How do you accomplish this? A bottleneck cartridge, or a longer cartridge that would require a large frame Glock?

Link to comment
Share on other sites

I am a gunsmith and have been playing with this for a while,

I have already been screwed out of some great ideas that have

made a new company mucho dollars and don't want that to happen

again.

What I need is some GOOD honest people to help with this that want

to be a big part of it.

I live in Boise Idaho if that means anything, I am better on the phone

and in person.

I know that you 9mm major shooters will want this and anyone that

hunts will too.

I can't give too much info out because this can/will be big.

Link to comment
Share on other sites

I do see 3 and 4'' groups at 100yds with this.

So far I have got under one inch groups at 33yds with

the 357sig with a 131 cast HF red PC boolits.

It had a six inch barrel and shot 1672fps, there is room

for more, need more time.

This will help anything that you can shoot in a Glock, 460 Rowland too.

Link to comment
Share on other sites

Have you asked John Taffin about this? I would think he would have a million good contacts you could speak with and he lives in the same town you do but I bet you already knew that. If you do talk with him tell him Mitch from the East says hi!

Link to comment
Share on other sites

Yes on the John Taffin, he lives about two miles from me. He is a great man.

I cannot imagine anyone more connected than him. We have been friends for many years and I am sure he would be willing to help. And yes, he is a great man for sure, one of the best.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...