JPetrowski Posted April 7, 2015 Share Posted April 7, 2015 (edited) I'm looking for some help on some load data for Some VVN320 powder I picked up. I have some 147gr Berrys that normally load with titegroup that I want to use. I am shooting a glock 34. Would someone be nice enough to share some load data? Thanks Oh yea, I checked their website but doesn't show much for 147gr bullets with n320. Edited April 7, 2015 by JPetrowski Link to comment Share on other sites More sharing options...
blairmckenzie1 Posted April 7, 2015 Share Posted April 7, 2015 my load was 3.8 grains of N320 under a MG 147 at 1.160. with the plated bullets you should be a couple tenths left. Its a really soft, clean load. Link to comment Share on other sites More sharing options...
bowenbuilt Posted April 7, 2015 Share Posted April 7, 2015 I'm doing 3.6 @ 1.135 out of a G34. Link to comment Share on other sites More sharing options...
JPetrowski Posted April 7, 2015 Author Share Posted April 7, 2015 What bullets are you using Bowenbuilt? I'm thinking of starting at 3.6 with an OAL of 1.15 then working it out from there. Thanks for the fast replies guys. Keep them coming Link to comment Share on other sites More sharing options...
bowenbuilt Posted April 7, 2015 Share Posted April 7, 2015 I was using 147 Berry's RN. Link to comment Share on other sites More sharing options...
R-Bros_JLR Posted April 7, 2015 Share Posted April 7, 2015 Not sure how much this applies, but I use 3.5gr of N320 with a Bayou 147 at 1.14. I was loading them at 3.0, but bumped it up recently to help work the bugs out of a new 2011. Link to comment Share on other sites More sharing options...
accu9 Posted April 8, 2015 Share Posted April 8, 2015 Different bullet and gun, but I load 147gr Xtreme's w/ 3.4gr N320 at 1.145 which produces 135PF out of my CZ. Link to comment Share on other sites More sharing options...
open17 Posted April 11, 2015 Share Posted April 11, 2015 3.4 N320 under a 147 Bayou, OAL 1.140. 3.7 for same PF with a 147 Montana Gold, same OAL. Runs 129-135 in half a dozen different guns. Link to comment Share on other sites More sharing options...
Red Ryder Posted April 13, 2015 Share Posted April 13, 2015 (edited) I am using 3.2 grains of N320 with a 147 Bayou Bullet and making 131 PF at 1.132 OAL. Plated bullets should be loaded to lead bullet specs if I am recalling correctly. Edited April 13, 2015 by Red Ryder Link to comment Share on other sites More sharing options...
TANFARM Posted April 24, 2015 Share Posted April 24, 2015 Finished experimenting with some N320 loads....X-treme 147 round nose and hollow points......tried 3.1-3.5 grns. n320.... Settled on 3.4 ....seems the best compromise .....no,stove pipes ...smooth....I like this powde a lot ........ Link to comment Share on other sites More sharing options...
JPetrowski Posted April 25, 2015 Author Share Posted April 25, 2015 I loaded some up at with 3.6gr at 1.150oal. I was very happy with it although I didn't get to chrono it yet. I'm going to try to chrono some soon. Then I'm gonna have to find some more of this powder. That's gonna be hard. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now