Bwana Six-Gun Posted March 19, 2015 Share Posted March 19, 2015 Want to try short colts in my 627, but don't want to buy a bunch from Starline if it is not going to work. If anyone have 40 or 50 to spare, I will be glad to buy them and pay shipping. Thanks. Link to comment Share on other sites More sharing options...
slflr Posted March 19, 2015 Share Posted March 19, 2015 PM your address. I will send you some. Link to comment Share on other sites More sharing options...
Bwana Six-Gun Posted March 19, 2015 Author Share Posted March 19, 2015 Thanks Bob for the Brass. Nest question. Will 38 SP dies work with SC ok or do I need to use some 9mm dies for seating and crimping. This is all new to me. Link to comment Share on other sites More sharing options...
Guest Posted March 19, 2015 Share Posted March 19, 2015 I use 38 special for the sizing, a 9mm powder funnel (dillon), 9mm seating, and a hybrid 38 special Lee FCD with a 9mm insert for the crimp. Lee sells extra parts for their dies on their website for good prices and they are great to work with. Link to comment Share on other sites More sharing options...
mcb Posted March 19, 2015 Share Posted March 19, 2015 For my Dillion 650XL I use the 38/357 shell plate, locator pins and sizing die. The rest of the setup is 9mm powder funnel, seat, and crimp dies. 40S&W escapement parts on the case feeder. Link to comment Share on other sites More sharing options...
jhgtyre Posted March 19, 2015 Share Posted March 19, 2015 Use the classified section for WTB ads. Link to comment Share on other sites More sharing options...
Recommended Posts