Midas Posted March 11, 2015 Share Posted March 11, 2015 Hypothetically speaking of Course, After using a Case Pro would you still need to run the case through a normal sizing die before loading ,? So I guess I'm asking does the Case Pro eliminate the need for Sizing Die? Thanks, Jan Link to comment Share on other sites More sharing options...
Kraj Posted March 11, 2015 Share Posted March 11, 2015 Yes, you still need a sizing die Link to comment Share on other sites More sharing options...
RePete Posted March 11, 2015 Share Posted March 11, 2015 After sizing in the CasePro load as usual. Link to comment Share on other sites More sharing options...
b1gcountry Posted March 11, 2015 Share Posted March 11, 2015 If nothing else, you need it to deprime. Link to comment Share on other sites More sharing options...
mach1soldier Posted March 11, 2015 Share Posted March 11, 2015 The case pro still needs a sizing die. I tested a batch of 50 with a case gauge to see if I could skip. 90% were fine but the other 10% needed sized. Since you have to deprime at some point, you might as well size them. Link to comment Share on other sites More sharing options...
RiggerJJ Posted March 11, 2015 Share Posted March 11, 2015 (edited) The casepro does not size the mouth of the case, just the lower 1/3. So yes, you will need to run thru a sizing die. I use U dies on 45, 40, and 9mm. jj Edited March 11, 2015 by RiggerJJ Link to comment Share on other sites More sharing options...
Midas Posted March 12, 2015 Author Share Posted March 12, 2015 Thanks everyone, That's what I thought but just wanted to make sure. Jan Link to comment Share on other sites More sharing options...
Foxbat Posted March 13, 2015 Share Posted March 13, 2015 The casepro does not size the mouth of the case, just the lower 1/3. jj Yes, indeed - the case is simply not rigid enough above that point, it is pushed into an oval, then springs back to round. Link to comment Share on other sites More sharing options...
ano Posted June 4, 2015 Share Posted June 4, 2015 well I used my vacation money and orderd a casepro today.. with motor.. and 2 duplex plates now we wait! its getting a RF100 to go with it tomorrow.. Link to comment Share on other sites More sharing options...
clawson2011 Posted June 11, 2015 Share Posted June 11, 2015 well I used my vacation money and orderd a casepro today.. with motor.. and 2 duplex plates now we wait! its getting a RF100 to go with it tomorrow.. Did they say how long the wait is? Link to comment Share on other sites More sharing options...
Cowboy1629 Posted June 11, 2015 Share Posted June 11, 2015 Mine took 1 week short of a year when I ordered it in 2013. I don't know what the wait time is now. Link to comment Share on other sites More sharing options...
ano Posted June 12, 2015 Share Posted June 12, 2015 noop, my money was refunded saying I would be noticed once ready.. guess I should email and get an estimated quote on time. Link to comment Share on other sites More sharing options...
hvsmith Posted June 12, 2015 Share Posted June 12, 2015 Last time I spoke to him 6-7 months ago he was at 12-13 months for lead time for a complete system, getting a die set or mounting kit was a very short lead time. Link to comment Share on other sites More sharing options...
Foxbat Posted June 13, 2015 Share Posted June 13, 2015 Keep trying, miracles do happen... it happened to me. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now