clawson2011 Posted February 22, 2015 Share Posted February 22, 2015 I have a couple magazine I have assembled from: STI Tubes -- 140mm TTI Followers TTI springs TTI basepads -- 4g They are loose fitting and I am looking to find someone I can send them to that can gig weld a bead on the feed lip so that the bases fit tighter and will then fall into my gauge. Link to comment Share on other sites More sharing options...
Sarge Posted February 22, 2015 Share Posted February 22, 2015 You could just file a tiny bit off the back of the feed lips. Link to comment Share on other sites More sharing options...
clawson2011 Posted February 22, 2015 Author Share Posted February 22, 2015 You could just file a tiny bit off the back of the feed lips. you don't happen to have a picture of this do you sarge? Link to comment Share on other sites More sharing options...
Glk21C Posted February 22, 2015 Share Posted February 22, 2015 You have your own picture. When you place the mag in the gauge you'll see exactly how much of the feed lips (usually at the rear) is preventing the mag from sitting in the gauge properly. A few passes at a time with a file will get you there. Go slow. Good luck Link to comment Share on other sites More sharing options...
clawson2011 Posted February 22, 2015 Author Share Posted February 22, 2015 Thanks. Got them all figured out. didn't have to take off near as much as i thought i would have to. Link to comment Share on other sites More sharing options...
Sarge Posted February 22, 2015 Share Posted February 22, 2015 Thanks. Got them all figured out. didn't have to take off near as much as i thought i would have to. Just got home so couldn't get you a pic. Glad you got it worked out. It's only a smidgeon that needed to come off. Link to comment Share on other sites More sharing options...
clawson2011 Posted February 22, 2015 Author Share Posted February 22, 2015 (edited) Thanks. Got them all figured out. didn't have to take off near as much as i thought i would have to. Just got home so couldn't get you a pic. Glad you got it worked out. It's only a smidgeon that needed to come off. Now if I could just find the proper way to bribe Cheely into finishing my 5"hybrid so I can sell my M&P limited and have him start my back up. Edited February 22, 2015 by clawson2011 Link to comment Share on other sites More sharing options...
Sarge Posted February 22, 2015 Share Posted February 22, 2015 Thanks. Got them all figured out. didn't have to take off near as much as i thought i would have to. Just got home so couldn't get you a pic. Glad you got it worked out. It's only a smidgeon that needed to come off. Now if I could just find the proper way to bribe Cheely into finishing my 5"hybrid so I can sell my M&P limited and have him start my back up. Can't help you there. He should be getting close to building my back up Open gun. Link to comment Share on other sites More sharing options...
clawson2011 Posted February 22, 2015 Author Share Posted February 22, 2015 (edited) Make sure you post picture. I like to see everyones take on how it should be. I have a couple really different custom Things I am doing to mine. Edited February 22, 2015 by clawson2011 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now