1sickPuppy Posted February 4, 2015 Posted February 4, 2015 Anyone tried the xtreme 135 gr with titegroup? How much powder u using and what OAL? Trying to figure out starting load for a g17/g34.
razorfish Posted February 4, 2015 Posted February 4, 2015 Anyone tried the xtreme 135 gr with titegroup? How much powder u using and what OAL? Trying to figure out starting load for a g17/g34. I ran a batch using this powder/bullet combination but tested them through a CZ SP01. My CZ likes a short OAL so my results all reflect an OAL of 1.09. Here's what I found: Powder: TiteGroup Bullet: Xtreme 135 RNFP OAL: 1.09 Gun: CZ SP01 Shadow Primer: CCI #500 SPP Brass: Winchester Range Pickup 3.0 Grains: 910.3 Avg Velocity - SD - 6.6 - PF 122 3.1 Grains: 931.9 Avg Velocity - SD - 9.3 - PF 125 3.2 Grains: 950.7 Avg Velocity - SD - 5.5 - PF 128 I ended up running 3.3 grains of TiteGroup but strangely I never chrono'ed this load. As a side note, I ended up staying with Bayou Bullets 135 grain bullets after burning through my Xtreme samples. Xtremes are nice but my main goal was to see if they smoked any more/less than the Bayou Bullets. I couldn't notice any difference so I went back to the less expensive Bayou bullet. As always, you should start low and work up slowly... good luck!
sk330lc Posted February 6, 2015 Posted February 6, 2015 X-treme 135gr RNFP bullets Once fired Speer +P nickle cases Winchester WSP primers Titegroup 3.44 gr. C.o.a.l 1.145 " Out of a 5" M&P Pro. At 45°f 10 shot average 978 fps 132pf Was getting 1.25" To 2.5" at 20yards
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now