6mm creed load, anyone using IMR 4350

[fastarget]

Most of the loading for this caliber has been with H4350, I have seen loads with hybrid 100. H4350 has been difficult to find, however there seems to be some of the imr4350 available.

I have read the debate regarding are the powders the same or not, reviewed the loads, and IMR seems to be different and in most cases required an extra grain of powder over the Hogdon variety.

What is your load with IMR4350?, has it been successful?, how is the pressure?, and were you able to load what you need in the case without compressing the load?

[ShooterSteve]

IMR is recommended for the larger bullets in 6.5. It ran ok in my gas gun, but nothing spectacular. It is a different powder for sure. You can look at them side by side and see a huge difference in it. I can't help you with 6cm data, but I took my 6.5 data straight off the hodgdon website.

[fastarget]

Thanks SS. Been looking at the loads this eve , and what I am seeing is more pressure and less velocity. Might have to wait for some H4350 to show up. Trying to get my loading done this winter,,,,

[Tom Freeman]

A local guy is using IMR in both his 6 Creed and 6x47. I will pimp him and see if I can get some numbers.

[fastarget]

Awesome, thanks, and Happy Thanksgiving