Highwayman Posted October 31, 2014 Share Posted October 31, 2014 While I've owned this Glock for a few years and have actively cleaned it every range trip, I'm now doubting my expertise following its first detail strip. I'm going back to basics, presenting you with my steps to cleaning my Glock for any corrections, tips, or suggestions. Step 1:Field strip Step 2:Use dry flannel rag to collect grime from chamber, slide, and receiver. Step 3:Use q-tips and rag around a plastic card to collect grime from rails, receiver. Step 4:Use Hoppes #9 on Boresnake, run through barrel. Step 5: Use old toothbrush dipped in Hoppes #9 on slide and receiver Step 6: Dry all parts, removing solvent off. Step 7: Use solvent dipped Glock-issued bore brush. Run patches through barrel. Step 8: Use q-tip coated in Hoppes elite oil to lubricate worn shiny parts, inside of slide, trigger connector, and outside of barrel. Step 9: Two drops of oil in slide rails, let them drip down the slide vertically. Step 10: Reassemble weapon. Link to comment Share on other sites More sharing options...
Sarge Posted October 31, 2014 Share Posted October 31, 2014 It's a Glock! Clean it once a year and call it good Link to comment Share on other sites More sharing options...
peterthefish Posted October 31, 2014 Share Posted October 31, 2014 (edited) Step 1: Field Strip Step 2: Spray the heck out of it with gunscrubber. Use toothbrush as needed to loosen gunk. Step 3: Spray liberally with aerosol CLP. Step 4: Spray with compressed air to remove excess oil. Step 5: Dry grip with dirty napkins. No more than once every 5-10k rounds. Edited October 31, 2014 by peterthefish Link to comment Share on other sites More sharing options...
Reshoot Posted November 1, 2014 Share Posted November 1, 2014 It's a Glock! Clean it once a year and call it good And, do it in your dishwasher! Link to comment Share on other sites More sharing options...
Ftc Posted November 1, 2014 Share Posted November 1, 2014 You're supposed to clean your glocks? Just wipe the powder residue off the outside and call it good! Link to comment Share on other sites More sharing options...
Smitty79 Posted November 1, 2014 Share Posted November 1, 2014 You need to clean Glocks? Who knew? Link to comment Share on other sites More sharing options...
LegionShooter Posted November 1, 2014 Share Posted November 1, 2014 I would strip it completely down once or twice a year (trigger assembly out, striker, extractor, firing pin safety, all of it) and fully clean it out. You'd be surprised how much junk builds up in the striker channel and firing pin safety pocket in the slide. I've stripped guns apart that were so dirty internally that it added a few pounds to the trigger pull weight. Link to comment Share on other sites More sharing options...
bountyhunter Posted November 2, 2014 Share Posted November 2, 2014 Tie it to a rope and drag it behind your pickup truck. The vibration will knock loose any dirt that needs removing. Link to comment Share on other sites More sharing options...
lee blackman Posted November 2, 2014 Share Posted November 2, 2014 I usually run mine thru the dishwasher... Use the pots and pans mode. Link to comment Share on other sites More sharing options...
johnsons1480 Posted November 2, 2014 Share Posted November 2, 2014 I detail strip mine and drop it all in an ultrasonic cleaner with a 10:1 water:simple green concentrate solution. Wash it off with hot water when it's done, let it dry, little oil on the barrel and rails. Repeat not very often. Link to comment Share on other sites More sharing options...
mfaith Posted November 12, 2014 Share Posted November 12, 2014 Sounds good to me. Glocks are pretty easy going. Link to comment Share on other sites More sharing options...
Dranoel Posted November 12, 2014 Share Posted November 12, 2014 Tie it to a rope and drag it behind your pickup truck. The vibration will knock loose any dirt that needs removing. ADDED BENEFIT: You can tell your friends it's a relic. Link to comment Share on other sites More sharing options...
AJE Posted November 12, 2014 Share Posted November 12, 2014 Tie it to a rope and drag it behind your pickup truck. The vibration will knock loose any dirt that needs removing. Regular dry fire practice makes mine look like I've done this. Link to comment Share on other sites More sharing options...
AJE Posted November 12, 2014 Share Posted November 12, 2014 (edited) To answer the question. .. Most of the time, my routine is as follows: G34 (USPSA gun) -Most of the time: not clean it at all -Prior to club match if it's really dirty; boresnake, light oil on slide rails and connector. -Light cleaning, every few months; Field strip, knock the crud off of the internals, brush out the barrel. -Full clean; twice in three years, full detail strip and clean. I'm close to another full detail strip since I'm done with matches for the year and I want to try to improve my trigger. I've also passed 10k rounds through the gun now. Carry gun (G19 on duty, G 22 on duty) I'll field strip and wipe down, as well as pull a boresnake through it. G22 gets used a shot or two at a time here and there for putting down deer, I don't worry about cleaning it each time. Actually whenever I do clean it, something happens in the atmosphere to cause a deer to get hit by a car and me to have to shoot it, so I try to avoid cleaning that one. Edited November 12, 2014 by AJE Link to comment Share on other sites More sharing options...
TH3180 Posted November 12, 2014 Share Posted November 12, 2014 Field strip Get the majority of the gunk with a dry rag Dry Bore Snake through the barrel 5 or 6 times. A drop of oil here and there. Put it back together Wipe down with a dry rag. Safety check Back in the safe it goes. It's a GLOCK not a metal gun. GLOCK's don't like to much oil and they run just fine a little dirty. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now