OscarMike Posted October 6, 2014 Share Posted October 6, 2014 Here's what I have, tell me what else I need to make this the sweetest polymer 3G pistol this side of the Mississippi. PRP trigger (installed by them) Don's SS Guiderod Wolff 14&16lb springs (depends on ammo) PRP extended mag release Dawson ICE magwell Arredondo and CC baseplates Xtreme grips Anything else to make the gun just "that much" better? Link to comment Share on other sites More sharing options...
Reshoot Posted October 6, 2014 Share Posted October 6, 2014 Perhaps a bit of polishing and re-crown the barrel. I paid Scott Springer to do these things, while he was doing a trigger job. Link to comment Share on other sites More sharing options...
GreenDragon64 Posted October 6, 2014 Share Posted October 6, 2014 I think it'd be cool to have a threaded barrel for it. Springer has some aftermarket barrels to make this happen. Extreme slide lightening? You're pretty good on it as is. Link to comment Share on other sites More sharing options...
Buddy2 Posted October 8, 2014 Share Posted October 8, 2014 I would replace the stainless guide rod with a Tungsten guide rod Link to comment Share on other sites More sharing options...
Loves2Shoot Posted October 8, 2014 Share Posted October 8, 2014 This... Link to comment Share on other sites More sharing options...
OscarMike Posted October 10, 2014 Author Share Posted October 10, 2014 That's sexy Scott, but I'm staying in the tactical class. No open for me! Reshoot, I had the feed ramp polished and the barrel re crowned at 11*. Forgot that! I think I'm going to send the pistol somewhere for grip reduction and stippling and a high rise grip, and then also do a new barrel. I'm at probably 7000-8000 rounds, and she's starting to show it in the group sizes. Link to comment Share on other sites More sharing options...
durdy1 Posted November 26, 2014 Share Posted November 26, 2014 That's a good looking gun. Link to comment Share on other sites More sharing options...
colbyjack Posted November 28, 2014 Share Posted November 28, 2014 I put the SP stainless in my production gun. But for my limited gun I filled with lead. Link to comment Share on other sites More sharing options...
jetjocky Posted November 29, 2014 Share Posted November 29, 2014 nice open XDM! Link to comment Share on other sites More sharing options...
bceglinski Posted December 26, 2014 Share Posted December 26, 2014 That's a nice looking gun Link to comment Share on other sites More sharing options...
OscarMike Posted December 27, 2014 Author Share Posted December 27, 2014 Thanks! Link to comment Share on other sites More sharing options...
soflarick Posted December 28, 2014 Share Posted December 28, 2014 I thought the oem XDM barrel was melonited. Recrowning would be either difficult or impossible if that's the case. Link to comment Share on other sites More sharing options...
take-a-knee Posted December 29, 2014 Share Posted December 29, 2014 I thought the oem XDM barrel was melonited. Recrowning would be either difficult or impossible if that's the case. Not the case. A Manson tool will cut through the Melonite. I does take a bit though. Link to comment Share on other sites More sharing options...
Loves2Shoot Posted December 29, 2014 Share Posted December 29, 2014 I thought the oem XDM barrel was melonited. Recrowning would be either difficult or impossible if that's the case. Not at all. Melonite is not hard to cut through if you have the right set of skills and equipment. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now