vixty Posted May 1, 2015 Share Posted May 1, 2015 ok thanks. I think I did order an 11lb as well but thought it would be to light. Link to comment Share on other sites More sharing options...
hlpressley Posted May 1, 2015 Share Posted May 1, 2015 (edited) Received my box of 165gr from Xtreme today. Loaded up with 2.6gr of Titegroup runs about 768 fps out of my M&P Pro 5" with good groups at 20 yards. I haven't had a chance to shoot too many of them yet but so far I really like them. I plan to order a few more thousand tonight. Edited May 1, 2015 by hlpressley Link to comment Share on other sites More sharing options...
rev1911 Posted May 1, 2015 Share Posted May 1, 2015 Received my box of 165gr from Xtreme today. Loaded up with 2.6gr of Titegroup runs about 768 fps out of my M&P Pro 5" with good groups at 20 yards. I haven't had a chance to shoot too many of them yet but so far I really like them. I plan to order a few more thousand tonight. What COAL is that at? Thanks Link to comment Share on other sites More sharing options...
jlo86cj Posted May 2, 2015 Share Posted May 2, 2015 I've loaded the same load at 1.14" Link to comment Share on other sites More sharing options...
hlpressley Posted May 2, 2015 Share Posted May 2, 2015 Received my box of 165gr from Xtreme today. Loaded up with 2.6gr of Titegroup runs about 768 fps out of my M&P Pro 5" with good groups at 20 yards. I haven't had a chance to shoot too many of them yet but so far I really like them. I plan to order a few more thousand tonight. What COAL is that at? Thanks COAL is 1.145 Link to comment Share on other sites More sharing options...
vixty Posted May 4, 2015 Share Posted May 4, 2015 I put a 13lb recoil spring in my M&P pro and the sights come back a lot quicker when using the 165's. Link to comment Share on other sites More sharing options...
oteroman Posted May 5, 2015 Share Posted May 5, 2015 9MM 165 PRN X-treme 1.153 AA5 4.4 803 132.495 929 Fed 9MM 165 PRN X-treme 1.165 AA7 5.4 813 134.145 929 Fed 9MM 165 PRN X-treme 1.165 AA7 5.6 843 139.095 M&P Fed 9MM 165 PRN X-treme 1.165 AA7 5.6 844 139.26 929 Fed 9MM 165 PRN X-treme 1.165 BE 2.94 754 124.41 929 Fed 9MM 165 PRN X-treme 1.5 BE 2.94 754 124.41 929 Fed 9MM 165 PRN X-treme 1.165 L-Shot 3.8 810 133.65 929 Fed 9MM 165 PRN X-treme 1.165 W231 3.1 764 126.06 929 Fed 9MM 165 PRN X-treme 1.165 W231 3.2 798 131.67 929 Fed Link to comment Share on other sites More sharing options...
jlo86cj Posted May 28, 2015 Share Posted May 28, 2015 2.8gr of N320 at 1.140" gave me 771 avg (36 ES) in a G34 with KKM barrel. 2.9gr gave me 787 avg (32 ES) Link to comment Share on other sites More sharing options...
vixty Posted May 28, 2015 Share Posted May 28, 2015 (edited) I put a red dont on a cz yesterday to test the accuracy of the 165s and it got 5in group at 30 yards and a 2in group at 15 yards. My load was 2.7 gr TG 1.150. I was also able to recover one of my bullets and it doesnt seem like the rifling in the barrel is bitting the bullet very hard. The groups were 6 shots Edited May 28, 2015 by vixty Link to comment Share on other sites More sharing options...
Flatland Shooter Posted June 16, 2015 Share Posted June 16, 2015 Tagged for future reference. Link to comment Share on other sites More sharing options...
gunther Posted August 17, 2015 Share Posted August 17, 2015 Has anyone dared to try Clays with this bullet? Link to comment Share on other sites More sharing options...
racnsoonr Posted October 23, 2015 Share Posted October 23, 2015 Good info..I've been searching Link to comment Share on other sites More sharing options...
oteroman Posted October 23, 2015 Share Posted October 23, 2015 Longshot got me into the high 900s a few hit 1000fps. I find WSF is my go to powder. A buddy is a LS fan so i tried it. Link to comment Share on other sites More sharing options...
MarkCO Posted October 23, 2015 Share Posted October 23, 2015 Anyone try e3 with 165's yet? A little. Not really ready to publish data, but it looks like 2.5 to 2.8 is where I will end up. Link to comment Share on other sites More sharing options...
dave33 Posted October 23, 2015 Share Posted October 23, 2015 I ran some 165 xtreme's just a couple days ago. Tried them over bullseye and e3. The bullseye load was 2.88gr at 1.16 OAL and averaged 815 FPS. Had two different e3 loads, one at 2.6gr, 1.16 OAL averaged 795 FPS, and one at 2.9gr, 1.16 OAL and averaged 840 FPS. I went with those two loads for e3 as I had tried 2.8gr some months ago when I first got them in and wanted to see what going slightly up and down would do. For what its worth the 2.9gr load of e3 was the most accurate of the three loads with the bullseye load not much worse, but none of the loads was as good as I get with 147gr ammo so far. Link to comment Share on other sites More sharing options...
cp4895 Posted October 24, 2015 Share Posted October 24, 2015 I shot three different loads with the 165 xtremes. Fired from a Sig P226 1) 3.0 of Bullseye averaged 790 FPS 2) 3.6 WSF averaged 805 FPS 3) 4.0 BE-86 averaged 834 FPS Best group ~3" for 10 shots @ 25 yrds OAL 1.650 WW brass Tula small rifle primers Link to comment Share on other sites More sharing options...
Slostang Posted November 2, 2015 Share Posted November 2, 2015 This season was my second shooting xtremes 165's in my Wilson barreled g34. They deff almost feel like cheating, and watching video you can see the front sight barely moves vertically at all. For me anyway... Mixed brass Xtreme 165 played 2.7gr tg Fed sp match 1.140oal 130pf I've also used 3.0gr of N320 when tg was very scarce for a bit. Great results there also but I wound up going back to tg for the cost savings. I have a pound of N310 sitting around and the idea of that load is tempting, but risky IMO. Link to comment Share on other sites More sharing options...
P.E. Kelley Posted November 2, 2015 Share Posted November 2, 2015 http://ammoguru.com/pats-notes-from-the-field-freedoms-9mm-hush-165s/ Link to comment Share on other sites More sharing options...
valerko Posted November 6, 2015 Share Posted November 6, 2015 This season was my second shooting xtremes 165's in my Wilson barreled g34. They deff almost feel like cheating, and watching video you can see the front sight barely moves vertically at all. For me anyway... Mixed brass Xtreme 165 played 2.7gr tg Fed sp match 1.140oal 130pf I've also used 3.0gr of N320 when tg was very scarce for a bit. Great results there also but I wound up going back to tg for the cost savings. I have a pound of N310 sitting around and the idea of that load is tempting, but risky IMO. At 2.5 TG I get 115 PF , that's what I used for bug match. To get 130 , I need 3g of TG out of GP XTrim Link to comment Share on other sites More sharing options...
coloradoshooter5 Posted November 17, 2015 Share Posted November 17, 2015 Anyone try these with CFE? Link to comment Share on other sites More sharing options...
oteroman Posted November 17, 2015 Share Posted November 17, 2015 I would like to test CFE... If I could find 165 FP or a mold. Link to comment Share on other sites More sharing options...
himurax13 Posted November 18, 2015 Share Posted November 18, 2015 Has anyone dared to try Clays with this bullet?I can't imagine using more than 2.6gSent from my VS986 using Tapatalk Link to comment Share on other sites More sharing options...
Flatland Shooter Posted November 18, 2015 Share Posted November 18, 2015 If I could find 165 FP or a mold. Why FP? I've always had good luck with RN. Link to comment Share on other sites More sharing options...
mikeone Posted November 18, 2015 Share Posted November 18, 2015 If I could find 165 FP or a mold. Why FP? I've always had good luck with RN. Bowling pins. These bullets kick butt on the pin table. FP grab the pin better and don't glance off as much for un centered hits. So they say. Link to comment Share on other sites More sharing options...
himurax13 Posted November 18, 2015 Share Posted November 18, 2015 147g flat points really whacks the pins off the table Sent from my VS986 using Tapatalk Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now