Putty Posted January 10, 2005 Share Posted January 10, 2005 Is it ok to use the shell & seated primer after you have pulled the bullet and just drop it into stage 2 of the RL550B? Link to comment Share on other sites More sharing options...
Larry White Posted January 10, 2005 Share Posted January 10, 2005 Anders, pull the decapping pin out of you resize die, get ALL the primers out of the primeing system and run the primed brass thru the entire process.-----Larry Link to comment Share on other sites More sharing options...
Matt Cheely Posted January 10, 2005 Share Posted January 10, 2005 I've done it before. Just seems to be a good idea to size the brass again, but if you have a Lee Factory Crimp die, it would be sized again anyhow. So I say go for it. Link to comment Share on other sites More sharing options...
Skywalker Posted January 11, 2005 Share Posted January 11, 2005 Is it ok to use the shell & seated primer after you have pulled the bullet and just drop it into stage 2 of the RL550B? Did it several times on a Lee Pro-1000 (no FCD) and Dillon Xl650 (FCD on station 5). No problem reported upon round firing. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now