Jump to content
Brian Enos's Forums... Maku mozo!

Any news one new magneto speed


Recommended Posts

  • 2 weeks later...

No, mount the unit to the rail beneath the gun, and have the sensors forward of the barrel. The only mounting hardware I'm aware of is for rifles and revolvers that go around the barrel

Link to comment
Share on other sites

  • 4 months later...

I have a V3, for rifles it's fantastic, surpressed, muzzle braked, or just plain crown it hasn't missed a shot or given any silly readings, on my rifle I have a POI shift of .2mils up, and my group opens up, but at 1000 my Applied Ballistic Kestrel was spot on.

Link to comment
Share on other sites

  • 1 month later...
  • 2 weeks later...

Finally got out to the range with the MagnetoSpeed v3. Attaching it to a CZ-75D was fairly simple, though I did try to use the clamp upside down at the start. Will probably mark the top side to make attachment go more smoothly. Plug in the cable to the sensor and the other end to the display unit and the screen showed ready. Gun felt lighter than expected and not particularly front-heavy. Nice

Berrys FP 124g

Bullseye 4.2g

CCI SPP in a used *FC* 1.047 OAL

Dillon 650XL w/ Dillon factory powder loader

48°, no wind with patchy clouds

1082
1102*
1084
1089
1087
1082
1082
1092
1077
1067
1082
1075
1080
1091
1065
1088
1065
1072
1071
1078
1069
1069
1055
1062
1053
1057
1048*
1063

AVG 1074 SD 13.1

I think the SD would be lower if I paid a bit more attention to the MS....as it loosened up as I was shooting and I didn't really notice until done. Notice how the readings toward the end seem to decrease. Will pay more attention to this next time.

The MS out of box for pistol had only one hiccup. Without the strap needed for rifle attachment, there is a small plastic cover for the data cable port that is free to travel within a slot. NO BIG DEAL....just wanted to mention that a small dab of Crazy Glue did the trick from me after talking with tech support.

Edited by amada8
Link to comment
Share on other sites

  • 4 weeks later...
  • 4 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...