LikesToShoot Posted July 10, 2014 Share Posted July 10, 2014 Good idea. A shooting friend of mine, TB, uses a magnet parts tray to scoop his cleaned brass up into his brass bin for reloading. Now I do the same thing to catch those dreaded brass plated steel cases. Link to comment Share on other sites More sharing options...
AJE Posted July 11, 2014 Share Posted July 11, 2014 What I do is a bit time consuming but it seems to work out for me... I'll wet tumble everything, then separate out certain head stamps like S&B, WCC, Ammoload, Blazer Aluminium, or anything else that appears infrequently, uniform the primer pockets, then load it for lost brass matches. Everything else, Win, R-P, CCI, Blazer, gets loaded and shot where I can recover it. Link to comment Share on other sites More sharing options...
GlockCanMan Posted July 13, 2014 Share Posted July 13, 2014 The only brand that I have seen with consistent reliability is Starline Brass. But then I pretty much use any 9mm brass without any major problems. Link to comment Share on other sites More sharing options...
Service Desk Posted July 13, 2014 Share Posted July 13, 2014 (edited) I got about 5K of FC NT head stamp 9mm's at scrap metal prices, rumbled them with walnut and Mothers Mag Wheel polish and ran them through one of my 1050's with a 38 Super die. This swages the crimp out of the primer pocket, deprimes the case and brings the case back to a dimension that makes further sizing with a 9mm die super easy. I load them on a 650 in small batches of 1k at a time. All of them have the coke bottle form shown in the above photo and all of them shoot more than acceptably. Edited July 13, 2014 by Service Desk Link to comment Share on other sites More sharing options...
razorfish Posted July 13, 2014 Share Posted July 13, 2014 I got about 5K of FC NT head stamp 9mm's at scrap metal prices, rumbled them with walnut and Mothers Mag Wheel polish and ran them through one of my 1050's with a 38 Super die. This swages the crimp out of the primer pocket, deprimes the case and brings the case back to a dimension that makes further sizing with a 9mm die super easy. I load them on a 650 in small batches of 1k at a time. All of them have the coke bottle form shown in the above photo and all of them shoot more than acceptably. Nice score! I actually run Federal cases as my match ammo. FC cases seem to be the most consistent of the big three factory (Winchester, Remington, Federal) cases these days. The only drawback to FC is that the primer pockets are a bit loose which shortens their life as "match ammo" to five or six reloadings assuming minor power factors. I mix FC NT and regular FC cases in my match ammo as they seem to load the same. Winchester was my goto brand, but their consistency has suffered over the past couple of years. I blame this inconsistency in WIN cases on the last "ammo drought" but that's just my opinion. Remington is okay, but not my favorite in 9mm. For practice ammo, I load and shoot any headstamp in 9mm but pull the Americ, S&B, A USA, Tulammo and PD stuff after the first reload. I use NuFinish on my brass with good results. Remember to avoid anything with wax in it to polish up your brass. I've never tried Mothers Mag Wheel Polish, but it sounds like it's good to go as it has the word "Polish" in the name and not the word "Wax". If you come across any more 9mm FC NT brass at a great price you don't want send them my way . Link to comment Share on other sites More sharing options...
razorfish Posted July 15, 2014 Share Posted July 15, 2014 Lapua without a doubt Never even thought about Lapua brass. I've loaded tens of thousands of range pickup 9mm brass and never even ran across a single piece of it. Ouch... at $0.27 each plus freight (Midway USA Sale Price) it better be good stuff Link to comment Share on other sites More sharing options...
bugsy Posted July 17, 2014 Share Posted July 17, 2014 WIN seems to be a commonly available brass. I reuse my brass and I prefer R-P (1) Speer (2) WIN(3) and whatever I can get hold of. I soak used casings in detergent with alcohol or a mild solvent, rinse, dry and tumble/polish. Put a light chamfer against anything with tight primer pocket and you are good to go until you see some cracked casings, then time to throw them out. Link to comment Share on other sites More sharing options...
JimmyZip Posted July 17, 2014 Share Posted July 17, 2014 I go on my day off and roll through all the local places that people shoot which aren't official ranges. I have found that they rarely pick up any brass and I get all the 9mm I need for a season in one day usually, or in a weekend for sure. Take it home, tumble, resize, tumble and bag for processing at a later date. Get enough 9mm or whatever caliber I'm looking for this way. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now