dlp40cal Posted April 6, 2014 Share Posted April 6, 2014 i just got a stock 2 new at the tanfoglio guns how do tear down and reassy of stock 2 how does pin come out slide and go back thanks for any help guys. Link to comment Share on other sites More sharing options...
kneelingatlas Posted April 6, 2014 Share Posted April 6, 2014 (edited) Here are the steps for a CZ, for purposes of routine cleaning it's essentially the same. http://www.brianenos.com/forums/index.php?showtopic=191773&page=1 Edited April 6, 2014 by kneelingatlas Link to comment Share on other sites More sharing options...
dlp40cal Posted May 22, 2014 Author Share Posted May 22, 2014 thanks for info. Link to comment Share on other sites More sharing options...
dhf Posted May 22, 2014 Share Posted May 22, 2014 Check out henningshootsguns.com he's got some good videos on disassembly/reassembly Link to comment Share on other sites More sharing options...
dlp40cal Posted May 22, 2014 Author Share Posted May 22, 2014 thanks Link to comment Share on other sites More sharing options...
bayougump Posted May 22, 2014 Share Posted May 22, 2014 Henning's assemble and disassemble vids are very good. I was in the same boat not long ago. Also the resident intellects on this forum ie atlas and nealio are most helpful Sent from my flux capacitor Link to comment Share on other sites More sharing options...
Onagoth Posted May 22, 2014 Share Posted May 22, 2014 Hennings videos helped me quite a bit. But I wouldn't recommend disassembling the sear housing just for the heck of it....that was is tricky to get back together, especially so with the 2 piece sear. The plunger can also be a bit tricky. Link to comment Share on other sites More sharing options...
dlp40cal Posted May 25, 2014 Author Share Posted May 25, 2014 thanks guys Link to comment Share on other sites More sharing options...
zsavage81 Posted May 28, 2014 Share Posted May 28, 2014 "Hennings videos helped me quite a bit. But I wouldn't recommend disassembling the sear housing just for the heck of it....that was is tricky to get back together, especially so with the 2 piece sear. The plunger can also be a bit tricky." If you wanna make the sear reassembly easy you need to make a slave pin, but I agree not, really any reason to take that apart unless you break something (I broke the leg off the spring and had to replace it is how I know). Link to comment Share on other sites More sharing options...
Mo Hepworth Posted June 2, 2014 Share Posted June 2, 2014 you can do yourself a favor...and ditch that AMBI safety for a single sided safety...depending on your hand size,...the extended or Custom size safety. Makes dissasembly a bit easier. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now