HOGRIDER Posted March 15, 2014 Share Posted March 15, 2014 Saw something similar on YouTube, and decided to see if the 550 bin bracket could be adapted to provide a much stronger mount for hanging the bins. The 550 bracket is definitely much thicker metal, and comes with the 550/650 strong mount. After some measuring, had a machinist friend cut some spacers out of mild steel roll and added some Krylon paint: Bolted up to the strong mount using existing holes: Definitely supports the stock 650 bin: Along with the larger 1050 sized bin: Should eliminate the chance of flexing/bending the stock bracket....... Link to comment Share on other sites More sharing options...
gixxerjunky Posted March 15, 2014 Share Posted March 15, 2014 So could you get some more spacers made? I would like a set and the. Would need a 1050 bin. The 650 is to small lol Link to comment Share on other sites More sharing options...
HOGRIDER Posted March 15, 2014 Author Share Posted March 15, 2014 So could you get some more spacers made? I would like a set and the. Would need a 1050 bin. The 650 is to small lol gixxer: Don't have the option to buy/sell the spacers. But any machine shop should be able to make you some fairly cheap. The guy on YouTube had used some copper pipe for his. If you need the specs on mine, just let me know. For the 1050 bins, AkroMils manufactures a bin identical to the Dillon unit. Their part #30230. Easily found on Ebay, etc. HTHs! HR Link to comment Share on other sites More sharing options...
Brassaholic13 Posted March 15, 2014 Share Posted March 15, 2014 Where did you get the formed steel chute bracket? Is that something only available with the strong mount? Link to comment Share on other sites More sharing options...
HOGRIDER Posted March 15, 2014 Author Share Posted March 15, 2014 Brass: Not sure if Dillon sells the part individually or not. It comes with the Dillon #22051 550/650 Strong Mount. Dillon's part number for the Cartridge Chute is: #16063 Might give Dillon a call to see if they sell one...... HR Link to comment Share on other sites More sharing options...
Brassaholic13 Posted March 15, 2014 Share Posted March 15, 2014 I'll e-mail them and see if I can buy it separately. I don't see it on their website. Thanks for the p/n. Link to comment Share on other sites More sharing options...
XxWoodsHunterxX Posted March 21, 2014 Share Posted March 21, 2014 Wish my bench was lower so I could use a string mount. Link to comment Share on other sites More sharing options...
HOGRIDER Posted March 22, 2014 Author Share Posted March 22, 2014 Well, my bench is 42" high; and the strong mount put the press handle at just the right height. I'm 6'1", and prefer to reload while standing. Link to comment Share on other sites More sharing options...
XxWoodsHunterxX Posted March 22, 2014 Share Posted March 22, 2014 I guess it pays to be tall I'm only 5'8" and I built my bench just about that height Link to comment Share on other sites More sharing options...
Youngeyes Posted March 22, 2014 Share Posted March 22, 2014 Wish my bench was lower so I could use a string mount. Build a wooden riser to stand on. You can set it to any height and put in your strong mount. Easier than lowering your bench. Link to comment Share on other sites More sharing options...
Steve RA Posted March 22, 2014 Share Posted March 22, 2014 Get a wood pallet. easier than building one. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now