bodene 5 Posted April 25, 2013 Share Posted April 25, 2013 how many folks use 200 lswc with their 21 ? mine seems to like them it will run fine then will start to eject the case into the one in the mag then I drop the mag then the spent case falls out of the mag well. it is hitting the next round in the mag on the eject . win231 4.5 gr @ 1.265 with .471 crimp round passes plunk test fine winchester brass . had a certified glock armour inspect it and he states all aspect of the weapon is fine . anyone else experience this ? will post a pic very soon Link to comment Share on other sites More sharing options...
bodene 5 Posted April 25, 2013 Author Share Posted April 25, 2013 sorry load chrono,s around 675 and is very accurate but only on extraction feeds fine Link to comment Share on other sites More sharing options...
bodene 5 Posted April 26, 2013 Author Share Posted April 26, 2013 found it thanks Link to comment Share on other sites More sharing options...
Steve RA Posted April 26, 2013 Share Posted April 26, 2013 I'd probably check the extractor first, also think I'd load a little heavier. Link to comment Share on other sites More sharing options...
bodene 5 Posted April 26, 2013 Author Share Posted April 26, 2013 ok thank you got to looking at the pic it appears the round from the mag is forward a bit weak mag spring maybe I don't know but it drives me crazy thanks again Link to comment Share on other sites More sharing options...
Nik Habicht Posted April 26, 2013 Share Posted April 26, 2013 The forward a bit seems normal -- all of my Glocks do that, in 9, .40 and .45..... Are you stock recoil springs with that load? Might need to go lighter.... Link to comment Share on other sites More sharing options...
bodene 5 Posted April 26, 2013 Author Share Posted April 26, 2013 yes sir spring is stock this is a le trade in and looks welll broken in also have tried a new spring that I purchased with same resaults . it seems after I disassemble the slide and reassemble it works fine and functions great for awhile I just found it odd was all I appreciate any and all input Link to comment Share on other sites More sharing options...
GigG Posted April 26, 2013 Share Posted April 26, 2013 I agree with Steve. Looks like an extractor issue. Link to comment Share on other sites More sharing options...
bodene 5 Posted April 26, 2013 Author Share Posted April 26, 2013 thank you fellows Link to comment Share on other sites More sharing options...
ranger Posted April 29, 2013 Share Posted April 29, 2013 When I tried to LSWC in my G21, the shell being extracted caught on the SWC lip of the next round. Link to comment Share on other sites More sharing options...
bodene 5 Posted April 30, 2013 Author Share Posted April 30, 2013 that's what I have also 70.% of the time they run great what did you what bullet did you change to Link to comment Share on other sites More sharing options...
Henny Posted May 2, 2013 Share Posted May 2, 2013 I pretty much gave up on SWCs for my G21s and 30. My Gen 4 21 will feed and eject SWCs fine the Gen 3 and 30 won't. I noted the rear frame rails are a little lower on the Gen 3 and 30. I'd advise against using them as it's hard on the extractor - I eventually chipped the extractor on the G3 21. I've switched to the TC style bullets and have no problems. Link to comment Share on other sites More sharing options...
bodene 5 Posted May 2, 2013 Author Share Posted May 2, 2013 tc style is that a flat point ? Link to comment Share on other sites More sharing options...
dirty whiteboy Posted May 2, 2013 Share Posted May 2, 2013 these will work:http://shop.snscasting.com/45-ACP-200-Gr-RNFP-45ACP-200RNFP-500.htm Link to comment Share on other sites More sharing options...
bodene 5 Posted May 4, 2013 Author Share Posted May 4, 2013 thank you dwb will give them a try. Link to comment Share on other sites More sharing options...
Lost River Posted June 8, 2013 Share Posted June 8, 2013 I have never had an issue with LSWCs in my G21. That being said, My 21 is an older one, early production. Prior to that, my gen 2 21 ran the same loads fine too. 200 grain laser cast LSCWs with 4.3 grains Clays. I also have a G21SF, but off the top of my head cannot recall if I have ran many of the LSWC loads through it. 675 FPS is pretty light. Link to comment Share on other sites More sharing options...
1911 S.I.S.sy Posted June 13, 2013 Share Posted June 13, 2013 I pretty much gave up on SWCs for my G21s and 30. My Gen 4 21 will feed and eject SWCs fine the Gen 3 and 30 won't. I noted the rear frame rails are a little lower on the Gen 3 and 30. I'd advise against using them as it's hard on the extractor - I eventually chipped the extractor on the G3 21. I've switched to the TC style bullets and have no problems. Same experience here. Just use FMJ or RN now. Link to comment Share on other sites More sharing options...
bodene 5 Posted June 14, 2013 Author Share Posted June 14, 2013 I hear you but they are just so accurate I went to lrnfp and currently 230 lrn Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now