dzhitshard Posted April 11, 2013 Share Posted April 11, 2013 Can anyone give me a measurement on one? I ordered one for a small frame and received one in a bag that is labeled ZT-MAGRLS-4-B-S Unfortunately it appears that in the bag was the release for a large frame glock. Quote Link to comment Share on other sites More sharing options...
Speedemon45 Posted April 11, 2013 Share Posted April 11, 2013 .515 long / tapered .440 at widest point down to .350 Quote Link to comment Share on other sites More sharing options...
dzhitshard Posted April 11, 2013 Author Share Posted April 11, 2013 Thank you for taking the time to do that. I was hoping to get a point to point measurement on the units width from one side of the grip to the other. If i recall correctly both the large and small frame hav ethe same diameter cut outs on the frame and it's just the over all length of the part that is different. Quote Link to comment Share on other sites More sharing options...
dzhitshard Posted April 11, 2013 Author Share Posted April 11, 2013 This is what I'm looking at. Top is Zev Tech I recieved. Bottom is standard Gen 4 Quote Link to comment Share on other sites More sharing options...
hysupra Posted April 15, 2013 Share Posted April 15, 2013 Does it work? Quote Link to comment Share on other sites More sharing options...
dzhitshard Posted April 15, 2013 Author Share Posted April 15, 2013 Does it work? The item I received was indeed a large frame model and Zev Tech saw this post and contacted me right away to get the situation rectified. This post was in no way an attempt to "mother f@ck" them. Yes it can physically function in a small frame gun but obviously not optimally. The pad side extends past the frame so the mag release is not held in place by anything other than the mag catch spring, thereby it will shift in the frame when depressed. Unless it is first pushed in the direction of the front strap it will bind. The fix for that is to actually get one sized correctly for your pistol frame. Quote Link to comment Share on other sites More sharing options...
Tyro Shooter Posted April 19, 2013 Share Posted April 19, 2013 PM'ed Quote Link to comment Share on other sites More sharing options...
tomthumb Posted May 29, 2013 Share Posted May 29, 2013 Same thing happen to me. I called them and they sent me out the correct one. It was a couple of months ago. Tom Quote Link to comment Share on other sites More sharing options...
Tyro Shooter Posted May 30, 2013 Share Posted May 30, 2013 Due to all of this (and for all of the boys back in assembly) Starting with the latest batch, we now have a large "S" and "L" engraved on the mag-release bodys. (Some days every little bit helps) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.