Jump to content
Brian Enos's Forums... Maku mozo!

M&P pro trigger binds with new striker


reichebrown
 Share

Recommended Posts

My striker finally broke in my M&P pro series 9mm. I swapped out another striker from a regular M&P. The old striker gave me a relatively smooth take up with a somewhat mushy factory break. With the new sear the trigger binds up about 1/3 of the way through take up. I can pull through the bind and get the same break I had before. I feel like it might be the striker block binding up when it is depressed. The SB is bone stock with no modifications. Any thoughts on what might be causing this?

I have a new sticker on the way from S&W so hopefully that might solve the problem...

Link to comment
Share on other sites

Is your old striker black and the new one silver? If so, I believe you need new striker spring keeper and striker guide. If you're replacing silver one with silver one and/or are replacing the whole assembly, please disregard this.

Only other suggestion I can think is to look into the striker channel to see if there is anything obstructing. I once found a cotton from the q-tip the owner used to clean the striker channel which was causing misfire.

Link to comment
Share on other sites

I just took the gun appart and cleaned the striker channel. While I was in there I noticed the Striker Block seems to be the thing that is binding. I took that out and gave it and the area it goes in a good cleaning. The trigger feels better as a result thanks!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...