cecil Posted March 5, 2013 Share Posted March 5, 2013 just wondering what oil/grease brand is best for lubing a bushing/barrel on your guns ? Quote Link to comment Share on other sites More sharing options...
DrawandDuck Posted March 5, 2013 Share Posted March 5, 2013 Do not have a bushing barrel but I use M-Pro7 for all my guns/rifles.....GREAT STUFF!! Quote Link to comment Share on other sites More sharing options...
Albertl35 Posted March 5, 2013 Share Posted March 5, 2013 I use FP-10 for a lubricant and will mix it with Mobil 1 if I want it a little thicker. Quote Link to comment Share on other sites More sharing options...
Reshoot Posted March 5, 2013 Share Posted March 5, 2013 Nothing but Slide Glide, on my competition guns Quote Link to comment Share on other sites More sharing options...
Chris Keen Posted March 5, 2013 Share Posted March 5, 2013 (edited) Frog Lube!! Grease is too thick for competition guns. Edited March 5, 2013 by Chris Keen Quote Link to comment Share on other sites More sharing options...
Bob DuBois Posted March 5, 2013 Share Posted March 5, 2013 Mobil 1 5W30, don't care for grease on a tight pistol in the 1911/2011 platform. Mobil 1 stays till the next cleaning which is easier than removing grease. Quart is a little over six bucks. Give it a try hard to beat. Quote Link to comment Share on other sites More sharing options...
Noximus03 Posted March 5, 2013 Share Posted March 5, 2013 Wilson's Combat Lube......on all my guns. Comp or carry. Good stuff and deals well with the constant Florida temperature changes. Quote Link to comment Share on other sites More sharing options...
RangeJunkie Posted March 5, 2013 Share Posted March 5, 2013 My old 2011 I used 0W-20 and it worked well. On my new Open Glock break free CLP, so far it's functioned perfect even at around 0 degrees after wind chill. Quote Link to comment Share on other sites More sharing options...
MoNsTeR Posted March 5, 2013 Share Posted March 5, 2013 SG Lite when it's warm, FP-10 when it's cold Quote Link to comment Share on other sites More sharing options...
Retread1911 Posted March 5, 2013 Share Posted March 5, 2013 I use corrosion X in addition to some slide glide. I love the corps soon prevention of this product and it is very thin and slick to boot. Quote Link to comment Share on other sites More sharing options...
gmg Posted March 5, 2013 Share Posted March 5, 2013 Mobil 1, Frog Lube, and Lucas gun oil. Militec if I have it. Quote Link to comment Share on other sites More sharing options...
sandrooney Posted March 5, 2013 Share Posted March 5, 2013 M-Pro7..... SG Lite on barrel, barrel lugs and slide stop. Quote Link to comment Share on other sites More sharing options...
DVC1911 Posted March 5, 2013 Share Posted March 5, 2013 I use GunButter. Great product!! Works in all weather conditions. Quote Link to comment Share on other sites More sharing options...
BostonBullit Posted March 5, 2013 Share Posted March 5, 2013 Mobile 1 most of the time. Tried frog lube and it worked great for a hundred rounds or so then i start having problems. Trying slide glide now, we'll see how that goes. Quote Link to comment Share on other sites More sharing options...
Steve RA Posted March 5, 2013 Share Posted March 5, 2013 Try any major brand synthetic wheel bearing grease, just use a little around the barrel where if fits the bushing. Quote Link to comment Share on other sites More sharing options...
9X23Guy Posted March 6, 2013 Share Posted March 6, 2013 Militec-1, doesn't matter the temperature. I used it extensively on my work carbine. Seems to have far less carbon build up. Has held up great on my Open gun as well. Quote Link to comment Share on other sites More sharing options...
cecil Posted March 6, 2013 Author Share Posted March 6, 2013 Mobil 1 5W30, don't care for grease on a tight pistol in the 1911/2011 platform. Mobil 1 stays till the next cleaning which is easier than removing grease. Quart is a little over six bucks. Give it a try hard to beat. I use Mobil 1 in my motorcycle.. i have about 8 qts... I WILL give it a try... Quote Link to comment Share on other sites More sharing options...
OpenDot Posted March 6, 2013 Share Posted March 6, 2013 Harley Davidson SYN3 Now my gun leaks instead of my Harley... Quote Link to comment Share on other sites More sharing options...
-Ace- Posted March 6, 2013 Share Posted March 6, 2013 I ran FP10 for a few years but recently switched to frog lube, it seems to stay cleaner and lasts longer. Quote Link to comment Share on other sites More sharing options...
orangeman711 Posted March 6, 2013 Share Posted March 6, 2013 I've used nothing but Tetra Gun Lubricant for the last 5yrs. It stays in place from 35 to 110 degrees without a problem. Quote Link to comment Share on other sites More sharing options...
SLM Posted March 6, 2013 Share Posted March 6, 2013 I've really been digging Frog Lube. I like the paste on the rails, lugs, etc and the liquid on the sear, disco and hammer hooks. It stays put, wipes off when you're cleaning and no chemical smell to irritate your pets, kids, or semi significant other. Quote Link to comment Share on other sites More sharing options...
sandman76 Posted March 6, 2013 Share Posted March 6, 2013 Lucas gun lube for me Quote Link to comment Share on other sites More sharing options...
kita Posted March 6, 2013 Share Posted March 6, 2013 This topic makes me giggle. Quote Link to comment Share on other sites More sharing options...
mike3232 Posted March 6, 2013 Share Posted March 6, 2013 I have been using mobile 1 0w. It works really well. Before that I used FP10 and it also worked well. Quote Link to comment Share on other sites More sharing options...
landry92 Posted March 6, 2013 Share Posted March 6, 2013 Hoppes elite gun oil! Quote Link to comment Share on other sites More sharing options...
.jpeg.02cfa736039d7c2422a836985c273500.jpeg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.