Eyorkfd Posted March 5, 2013 Share Posted March 5, 2013 looking for any load data for 147gr bullets using using TiteGroup. New to reloading and purchased some Bayou Bullet 147 FP. I have about 4 lbs. of TiteGroup but as all of you are aware powder is hard to come by and need to load with what I have. Any data would be appreciated. Link to comment Share on other sites More sharing options...
PROBIKE101 Posted March 5, 2013 Share Posted March 5, 2013 3.4 gr at 1.144 aol check from there........ Link to comment Share on other sites More sharing options...
Hammbone Posted March 5, 2013 Share Posted March 5, 2013 I'm also at 3.4gr with Berry's 147gr bullets. I experimented with OAL. I found 1.160" to be most accurate out of my Beretta M9. This isn't the most accurate load I've found for "me". I'm trying to place an order with Donnie to try some of his 147gr Bayou bullets. I hope to have better luck with them. Link to comment Share on other sites More sharing options...
Eyorkfd Posted March 5, 2013 Author Share Posted March 5, 2013 Thanks Guys!!! New to reloading and trying to use what I have available. Link to comment Share on other sites More sharing options...
jkatz44 Posted March 5, 2013 Share Posted March 5, 2013 Bayous definately have higher velocity than jacketed.(MG) Using 3.4 gr Titegroup w/ MG 147 cmj, I was getting 130 PF with m&p 5 in. Using only 3.2 gr titegroup with bayous 147 I was getting 138 PF. So I'm thinking 3.0 gr should be perfect. Link to comment Share on other sites More sharing options...
fireman489 Posted March 5, 2013 Share Posted March 5, 2013 I put up a spread sheet w some TG info 3 days ago.... go check it out Link to comment Share on other sites More sharing options...
424D57 Posted March 5, 2013 Share Posted March 5, 2013 Another 3.4gr titegroup MG 147cmj 1.153 OAL right around 130PF -424D57 Link to comment Share on other sites More sharing options...
L3324temp Posted March 6, 2013 Share Posted March 6, 2013 Bayou 147 TiteGroup 3.2 OAL 1.135 PF 136.5 M&P Pro Berry 147 TiteGroup 3.2 OAL 1.160 PF 134.2 M&P Pro Link to comment Share on other sites More sharing options...
thermobollocks Posted March 15, 2013 Share Posted March 15, 2013 2.8 grains with a non-coated lead TC loaded to 1.14" chronos right around 880 fps for me out of a 5" M&P. Very consistent -- more so than Clays. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now