inthebeech Posted February 16, 2013 Share Posted February 16, 2013 The two styles of bullets that the current Dillon 38 seater plug accommodates are SWC's and RN's. With the loose fit between the plug and the die housing, the plug (both ends) is mauling the nose of my soft HBWC's and DEWC's. These styles seat best when a simple flat surface is pushing on the nose. What do you folks do to handle this? Thanks. Link to comment Share on other sites More sharing options...
DougCarden Posted February 16, 2013 Share Posted February 16, 2013 Dillon makes a flat plug for the die seater. Call them and they will get one to you. DougC Link to comment Share on other sites More sharing options...
newboy Posted February 16, 2013 Share Posted February 16, 2013 I usually fill the cavity of one of the seaters with paraffin for wadcutters. Link to comment Share on other sites More sharing options...
inthebeech Posted February 16, 2013 Author Share Posted February 16, 2013 Thanks doug. I'm on it. Link to comment Share on other sites More sharing options...
Intel6 Posted February 17, 2013 Share Posted February 17, 2013 I had this problem when loading wadcutters for .32 S&WL and I just stuck a wadcutter upside down in the seating die and compressed it in there. worked great and seated the bullets fine. Of course I was loading on my 650 so I crimped seperatly. Neal in AZ Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now