magpulled Posted February 16, 2013 Share Posted February 16, 2013 (edited) I recently purchased some extreme bullets and need help with load data b/c none of my manuals have this projectile listed. What I have is a plated rnfp 135 grain. The powder I have right now is vv n330, imr sr4756,power pistol, and bullseye. Any help is most appreciated. Edited February 16, 2013 by magpulled Link to comment Share on other sites More sharing options...
magpulled Posted February 17, 2013 Author Share Posted February 17, 2013 Guess y'all don't know either Link to comment Share on other sites More sharing options...
L3324temp Posted February 18, 2013 Share Posted February 18, 2013 I run 135's with Titegroup but not any of the powers you have listed. Berry 135g 3.6g TG 1.150 OAL 132PF from a M&P Pro 5" Link to comment Share on other sites More sharing options...
Desmo412 Posted February 18, 2013 Share Posted February 18, 2013 I run a 135 Bayou bullet with either 3.5gr N320 or 3.8gr Solo1000 out of a 4.5" XDM. I would say start at 3.5 with the N330...you will probably end up somewhere around 3.6-3.9 grains for a 130-135PF. As always, use at your own risk. Link to comment Share on other sites More sharing options...
2kcrewcab Posted February 18, 2013 Share Posted February 18, 2013 I run the 135 RNFP (plated) from The Bullet Works over 3.7 grains of N320 and make around 130 PF out of a 5" XD. They seem to be some of the most accurate loads I have in 9mm. Link to comment Share on other sites More sharing options...
HoMiE Posted February 18, 2013 Share Posted February 18, 2013 Shot plated 135s or a little bit and in my experience just use load data for jacketed 124-125s and reduce starting loads by a couple of tenths. I never dropped powder load lower than what is usually listed for 147, you will be closer to 124-125 load data. Get a chrono and work up a load. Link to comment Share on other sites More sharing options...
jlamphere Posted February 18, 2013 Share Posted February 18, 2013 I loaded some 147g Black Bullet Intl. this weekend with 3.5g N320 and they ran a 139 PF. Not much help I know, but it may give you some point of reference. Link to comment Share on other sites More sharing options...
magpulled Posted February 20, 2013 Author Share Posted February 20, 2013 Thanks to all for the input. I will put to good use Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now