Jimbo76 Posted January 29, 2013 Share Posted January 29, 2013 Having feeding issues with these in an STI Eagle 9mm. They work fine in a Steemaster using same mags. what oal is everyone using with these ? Link to comment Share on other sites More sharing options...
Hi-Power Jack Posted January 29, 2013 Share Posted January 29, 2013 What type of feeding issue are you having? What OAL are you using for the STI Eagle? For each gun, you have to check to make sure round feeds thru mag, and chambers in your chamber (take barrel out of gun, and PLUNK the cartridge in). If it doesn't plunk, it's too long - have to shorten it. If you have 15 spare minutes - read some of the "Reloading 9mm" posts here - worth every minute of it. Link to comment Share on other sites More sharing options...
RH45 Posted March 19, 2013 Share Posted March 19, 2013 I'm running older SVI mags in my STI 2011s, so I can go as long as the bbl will take, but, seem to get best accuracy at 1.15" with that bullet. Under inch groups at 25 yards. Link to comment Share on other sites More sharing options...
ss+P Posted March 20, 2013 Share Posted March 20, 2013 do you have spacers in your mags? it could be that simple. i am using a factory oal and with spacers i have just enough clearance between the front of the round and the front of the mag Link to comment Share on other sites More sharing options...
cecil Posted March 20, 2013 Share Posted March 20, 2013 I am loading PD 124gr JHP bullets for 9mm .. 4.3 gr W-231.... COL 1.112... works fine in my Steel Master & Glock 19 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now