mildot1 Posted January 22, 2013 Share Posted January 22, 2013 Cannot get the cases to reliably feed into the shell plate, may feed five or six then mis feed 2 out of 3. Any ideas?? Thanks Mildot Quote Link to comment Share on other sites More sharing options...
mcracco Posted January 22, 2013 Share Posted January 22, 2013 Crud in shellplate grove where case rim sits Shellplate too loose/tight Feeding too fast (there's a retimed cam arm available for sale here by board member) Quote Link to comment Share on other sites More sharing options...
Torogi Posted January 22, 2013 Share Posted January 22, 2013 Can you describe the misfeed? does the case go in sideways? more pronounced in 40 but happens to 9 too. There is a fix to this somewhere on the forum. Quote Link to comment Share on other sites More sharing options...
mildot1 Posted January 23, 2013 Author Share Posted January 23, 2013 Loading 223. Shell plate snugged down and backed of 1/8 turn. Case pusher removed and cleaned(also checked to make sure it is correct one) and re-installed. Cases are tipping over to the left, then being jammed against the shell plate. Thanks Mildot Quote Link to comment Share on other sites More sharing options...
blueeyedme Posted January 23, 2013 Share Posted January 23, 2013 Look for the fix by SPRSkip. Works wonders... http://www.brianenos.com/forums/index.php?showtopic=162927&hl= Quote Link to comment Share on other sites More sharing options...
Flash66 Posted January 23, 2013 Share Posted January 23, 2013 Loading 223. Shell plate snugged down and backed of 1/8 turn. Case pusher removed and cleaned(also checked to make sure it is correct one) and re-installed. Cases are tipping over to the left, then being jammed against the shell plate. Thanks Mildot I had that problem with .223 and it was because my shellplate was too lose. Also check to make sure your ball detent on the shell plate is seated correctly. Quote Link to comment Share on other sites More sharing options...
mildot1 Posted January 25, 2013 Author Share Posted January 25, 2013 Look for the fix by SPRSkip. Works wonders... http://www.brianenos...opic=162927&hl= Thanks for the help Mildot Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.