.40 major load for Glock 35

[Wilfred]

Anyone have a load data for .40 major for Glock 35

Preferably Bear Creek 180gr and Solo 1000

Any input is appreciated.

Thanks

[titandriver]

Well, you asked for any so here's what I shoot in my G35 with Storm Lake barrel: 220 SnS cast bullet, Promo powder, longest OAL that'll fit your mag. Not crazy about putin' my actual load out there but you can use Red Dot data for starters.

[twodownzero]

I load 4.6 @ 1.200" for 167 pf in a 2011.

4.4-4.5 should make major at 1.135" for the G35 with some cushion.

[Wilfred]

Nice, I will try

[leas327]

You will never get a 1.200" load in a Glock.

Here is one of the loads I have used in my 35.

Lee 175gr TC mold that drops oversize 185 grain bullets, Fed SP primer, 4.2 gr. Solo 1K, 1.115 OAL.

This made 168 pf at the Ohio Sectional this year. It was about 95 degrees that day.

With a bullet that is is 5 grains lighter and will be able to be loaded a little longer you might have to go up to 4.4/4.6 to make major. I would start at 4.0 grains and check for velocity and accuracy.

[Wilfred]

I loaded 100rds of this earlier but haven't tried it yet. I will try them Saturday at the range.

4.4gr Solo 1000

180 gr Bear Creek molly coated flat point

1.130 OAL

Mixed stamped brass