PumpGunGuy Posted August 19, 2012 Share Posted August 19, 2012 I know this is a common problem. I have the updated ejector, and I have tried substituting the extractor from a Gen3 G34 (that has a very stable ejection patern), and a Lone Wolf LCI extractor with no resolution. I have the problem with WWB, Federal NATO, and reloads (124's @ 1070fps), so I don't think it's an ammo issue. I now have 1220 rounds through the gun. What else is there to do? Thanks for any suggestions. Rick Link to comment Share on other sites More sharing options...
Rick88 Posted August 19, 2012 Share Posted August 19, 2012 I was just shooting my friends 19 today it is suprising how accurate that thing is with such a short barrel I was impressed, but like you his brass was everywhere. If you get an answer I wll pass it along. Link to comment Share on other sites More sharing options...
Black&TAN Posted August 20, 2012 Share Posted August 20, 2012 This issue was much more common in earlier runs of 40 cal Gen4's. Glock tweaked the design of the ejector and it seems to have remedied the issue. I have however replaced a few G19 Gen4 Trigger Mechanism Housings, which contain 9mm ejector 30275, the most recent iteration. I would recommend you either get in touch with a Certified Armorer or Glock directly at (770) 432-1202, and will provide the latest at no charge to you if needed - just have your serial handy. sent via Tapatalk Link to comment Share on other sites More sharing options...
SJ 40 Posted August 20, 2012 Share Posted August 20, 2012 My hope is for the Apex glock 9 mm extractor to be released sometime around September I hear. It seems to be Glocks new idea of Perfection,the perfection with the small p. SJ 40 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now