CZ SP-01 Shadow, may I have lost a spring?

[gunguru]

Yesterday, I decided for the first time to completely disassemble my SP01 Shadow. I got him for a few month now, I field strip it a few time, but no complete strip tease. I encounter absolutely no problem and it was a pleasure.

My problem is I don’t know if I lost a small spring or not. Let me explain.

I removed the slide assembly, then I removed the main spring assembly, I lift the sear spring tab lock (on the safety shaft), then I remove the left safety, after that I slip out the sear assembly and the left safety lever came by itself. No problem up to here.

Then I put the gun on table and continue my clean up of already removed parts.

When I came back to the frame, I saw the 2 little plungers on each side of safety hole. But “voila”, one (the left one) have a spring, but not the right one. I saw the frame was machined to receive a spring on both side, but only the left plunger have a “prong” to hold a spring. And I can’t remember if I saw a spring when I remove the sear assembly.

So my question is : Does the SP01 Shadow have springs on both sides?

Thanks for your help.

Here’s few pictures of what I’m talking about:

[HoMiE]

Only one side, if you didn't have ambi and wanted to run safety on other side, then you'd put it on that side.

Edited August 9, 2012 by HoMiE

[steel1212]

my CZC shadow with the stock wide low safeties has a spring and plunger on the left side and a retaining plate on the other side with no spring.

[Torogi]

I think most of regular SP-01's only have 1 spring. Just on the left.

[gunguru]

Thanks folks...

I'm pretty happy to not :

a) Search everywhere in the living room for a 3/8" long small spring

b ) order one from wherever, pay the spring 15 cents but 20 bucks of shipping....

Edited August 9, 2012 by gunguru