Acespeedy Posted July 30, 2012 Share Posted July 30, 2012 I just installed the V2 ZT Fulcrum trigger in my G35. The trigger feels great, but I have an issue with it. While testing the function (dry-fire) if I press and hold the the trigger down and cycle the slide (reset trigger) the striker will drop if I release the trigger slowly. I haven't tried it with live ammo, but I suspect it will send another round downrange. I left the the pretravel and overtravel set from the factory setting. I'm running the lightened striker spring with a titanium firing pin and the plunger/spring that came with the kit. I don't know where to start the adjustments or which springs to change, and any help is much appreciated. Thanks in advance, JG Link to comment Share on other sites More sharing options...
P.E. Kelley Posted July 30, 2012 Share Posted July 30, 2012 Do yourself a BIG favor and call them tomorrow morning and they WILL set you up right. Link to comment Share on other sites More sharing options...
DRAB81 Posted July 30, 2012 Share Posted July 30, 2012 Do yourself a BIG favor and call them tomorrow morning and they WILL set you up right. My experience with Glockworx/Zev Tech is consistent with this. They have been fantastic to deal with. Link to comment Share on other sites More sharing options...
Acespeedy Posted July 30, 2012 Author Share Posted July 30, 2012 Thanks, I will give them a call tomorrow. Link to comment Share on other sites More sharing options...
Pipeliner Posted July 31, 2012 Share Posted July 31, 2012 Try looking on there website they have a link to YouTube video on trouble shooting the trigger kit very helpful Link to comment Share on other sites More sharing options...
Tyro Shooter Posted July 31, 2012 Share Posted July 31, 2012 PM sent call me in the morning and I'll fix the glitch. Tim (the other Kelly) Link to comment Share on other sites More sharing options...
Acespeedy Posted July 31, 2012 Author Share Posted July 31, 2012 I spoke to Tim (not sure if ur the Tim) but I appreciate the excellent customer service and I will be shipping the pistol asap. Thanks again in advance , you all have been really helpful. JG Link to comment Share on other sites More sharing options...
jonb. Posted August 4, 2012 Share Posted August 4, 2012 Gworx is awesome in regards to customer service. This should take no more than patience with the postal service in regards to this fix. Link to comment Share on other sites More sharing options...
JBP55 Posted August 4, 2012 Share Posted August 4, 2012 Sounds like the firing pin may be slightly out of tolerance. Link to comment Share on other sites More sharing options...
beastyboy Posted August 8, 2012 Share Posted August 8, 2012 I had the same problem a few days ago when I tried to limit the amount of over-travel. Three observations: 1) The trigger would drop as Acespeedy described when used with the Titanium pin in the "backstrap". Same happened with the longer (and equally tight-fitting) pin provided with the Grip Force adapter. With the factory pin, which sits in there more loosely, the trigger did work just fine with no danger of an accidental discharge. Since I really like the Grip Force adapter, the aforementioned setup is not an option, even though it works. 2) I had to allow a little more pre-travel than I like to solve the problem. 3) It didn't matter whether I adjusted the over-travel via the Fulcrum Trigger or a Lone Wolf ejector housing with a set screw. When I got the over-travel to where I wanted it to be, I had to back off (i.e. allow more) pre-travel or the trigger would act dangerously. Is this a problem with the trigger itself (which I am quite happy with) or is it just not possible to adjust both pre- and over-travel to their minimum? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now