steel1212 Posted July 23, 2012 Share Posted July 23, 2012 Ok first off where do I find lot number on a 8 pound jug? Secondly anybody got load data for this bullet out of a CZ shadow? Link to comment Share on other sites More sharing options...
dsmw5142 Posted July 23, 2012 Share Posted July 23, 2012 Ok first off where do I find lot number on a 8 pound jug? Secondly anybody got load data for this bullet out of a CZ shadow? Lot number should be on a sticker on the bottom of the jug. I'm not sure if you have a short chamber or not, but I used to load those to 1.125 with 3.7gr for 133PF. Link to comment Share on other sites More sharing options...
steel1212 Posted July 23, 2012 Author Share Posted July 23, 2012 3-17-10 1930 is on the sticker Link to comment Share on other sites More sharing options...
cslafrain Posted July 23, 2012 Share Posted July 23, 2012 A friend is loading 4.0 at 1.12 for the same 133pf. I have a hot lot that takes less but each is a bit different. Let me know how they work out and if they meet your expectations. Sent from my DROID RAZR using Tapatalk 2 Link to comment Share on other sites More sharing options...
steel1212 Posted July 23, 2012 Author Share Posted July 23, 2012 A friend is loading 4.0 at 1.12 for the same 133pf. I have a hot lot that takes less but each is a bit different. Let me know how they work out and if they meet your expectations. Sent from my DROID RAZR using Tapatalk 2 I've got some loaded up at 1.125 with 3.8 and we'll see where that puts me tomorrow. Link to comment Share on other sites More sharing options...
dsmw5142 Posted July 24, 2012 Share Posted July 24, 2012 Lot #1930 was the slowest lot I ever had. The lot prior to that one (don't have the number anymore) took 3.7gr with a 125gr BBI and 3.5 with a 147gr BBI. When I started the lot #1930 I had to bump to 4.1 @ 1.135 (yes +.6 grains!) to get the same PF with the 147gr BBI. I was using 3.8gr with a 147gr MG CMJ then had to bump to 4.4 with the lot #1930, which was almost compressed but still worked fine. I'm pretty confident you have a safe starting point with 3.8, but you'll most likely need more powder. Good luck. Link to comment Share on other sites More sharing options...
steel1212 Posted July 24, 2012 Author Share Posted July 24, 2012 ThAnks! Link to comment Share on other sites More sharing options...
twodownzero Posted July 24, 2012 Share Posted July 24, 2012 4 grains is my 125 load, 3.8 for 135s and 3.4-3.5 for 147s. All at 1.120" or so. Link to comment Share on other sites More sharing options...
steel1212 Posted July 27, 2012 Author Share Posted July 27, 2012 well at 3.8 I'm at about 930FPS. Went to 4.1 today and I'm at about 1kFPS. I'm thinking my next outing will be 4.3 and that should put me +130 which is where I like to be. Link to comment Share on other sites More sharing options...
Wilfred Posted August 12, 2012 Share Posted August 12, 2012 Where do you find the Lot# for Solo1000? Thanks Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now