goldfish Posted June 29, 2012 Share Posted June 29, 2012 (edited) With all the precaution labels on the reloading manuals, primers and gun powders. The fact remains the same that we are handling hazmat-explosives. There still remains in the back of my head, what if. What else can i add to make this more safe? I am looking for ideas what would you have in your reloading station to make it more safe, in addition to gloves and safety glasses. So far I got my list started. a. Fire extinguisher b. Exit path out of the area c. Apron vest d. Face shield e. proper lighting (overhead out of primer tube path) (shell plate area) f. anti static pad or other means Appreciate any advise. Edited June 30, 2012 by goldfish Link to comment Share on other sites More sharing options...
Sarge Posted June 29, 2012 Share Posted June 29, 2012 With all the precaution labels on the reloading manuals, primers and gun powders. The fact remains the same that we are handling hazmat-explosives. There still remains in the back of my head, what if. What else can i add to make this more safer. I am looking for ideas what would you have in your reloading station to make it more safer, in addition to gloves and safety glasses. So far I got my list started. a. Fire extinguisher b. Exit path out of the area c. Apron vest d. Face shield Appreciate any advise. Holy cow! I am way under protected when I load! The fire extinguisher is a good idea but the rest is overkill in my opinion. Link to comment Share on other sites More sharing options...
TruStreet Posted June 29, 2012 Share Posted June 29, 2012 I have a rubber mat to cut down on static Link to comment Share on other sites More sharing options...
warpspeed Posted June 29, 2012 Share Posted June 29, 2012 Take up golf. Link to comment Share on other sites More sharing options...
diehli Posted June 29, 2012 Share Posted June 29, 2012 Have someone else reload for you, off site. Also known as buying ammo. Link to comment Share on other sites More sharing options...
diehli Posted June 29, 2012 Share Posted June 29, 2012 But, then, when you unload it, it's awfully dangerous, so you should probably have someone else do that, too. IOW: do what Ward said and take up golf. Link to comment Share on other sites More sharing options...
SmittyFL Posted June 29, 2012 Share Posted June 29, 2012 I couldn't find the old post I had on here and unfortunately I've quit smoking now so it doesn't really have as much meaning but..... One thing I always did to increase my safety level is have an open beer or two within arms reach in case my cigarette started a powder fire while I was watching football and reloading. Link to comment Share on other sites More sharing options...
Sarge Posted June 29, 2012 Share Posted June 29, 2012 I couldn't find the old post I had on here and unfortunately I've quit smoking now so it doesn't really have as much meaning but..... One thing I always did to increase my safety level is have an open beer or two within arms reach in case my cigarette started a powder fire while I was watching football and reloading. Link to comment Share on other sites More sharing options...
Retread1911 Posted June 29, 2012 Share Posted June 29, 2012 I couldn't find the old post I had on here and unfortunately I've quit smoking now so it doesn't really have as much meaning but..... One thing I always did to increase my safety level is have an open beer or two within arms reach in case my cigarette started a powder fire while I was watching football and reloading. I had to put down my vodka glass and pause my reloading I was laughing so hard I that one:). But seriously. The fire extinguisher is a good idea. Add some safety glasses and you are golden. I should add a fire extinguisher. Retread Link to comment Share on other sites More sharing options...
mcracco Posted June 29, 2012 Share Posted June 29, 2012 b. Exit path out of the area I'm sorry, but all I could think of is this: http://www.youtube.com/watch?v=KAp9sFVdERQ Link to comment Share on other sites More sharing options...
goldfish Posted June 29, 2012 Author Share Posted June 29, 2012 Golf is where my shooting hobby got started. Years ago went golfing with my buddies, in between we talked about guns and everyone likes shooting. We decided to go visit a local range the next weekend and on the way home I picked up my first limited pistol. I was hooked and that was the last time I touched my golf clubs. My collection grew and started reloading too. I rather be safe than sorry. Link to comment Share on other sites More sharing options...
Graham Smith Posted June 29, 2012 Share Posted June 29, 2012 Sorry, but I can't resist - it's either "safer" or "more safe". "More safer" is really poor grammar. FWIW, I have always worn safety glasses when reloading but that's about it. For that matter, I always wear safety glasses when I'm doing most things in my work area. And there is already a fire extinguisher and a sink there, both of which are worth having in any workshop. I have an apron in my workshop but have never seen a need for it while reloading - I don't have any nails or screws or tools to put in it. The one thing not on your list which is often overlooked is good lighting. The most dangerous work area I can imagine starts by being poorly lit. Basically, having spent 20yrs working in medical labs around really dangerous stuff, I've just developed some good habits which I follow to this day. Link to comment Share on other sites More sharing options...
dillon Posted June 29, 2012 Share Posted June 29, 2012 Don't position flourescent lights directly above your loader. If in the unlikely event you set the primers off, the follower rod will launch upward. Set lights off to either side by 12-18" so you don't have to clean up broken glass; Far more hazardous than anything else. Link to comment Share on other sites More sharing options...
ChuckS Posted June 29, 2012 Share Posted June 29, 2012 I have a rubber mat to cut down on static Unless your mat has some sort of anti-static treatment, it may actually increase the possibility of static buildup and discharge. The whole game is to minimize static buildup and find a path to discharge static that does not include explosives/propellents/primers/expensive electronics. Google anti-static. There is a lot of good info out there... Later, Chuck Link to comment Share on other sites More sharing options...
retarmyaviator Posted June 29, 2012 Share Posted June 29, 2012 With all the precaution labels on the reloading manuals, primers and gun powders. The fact remains the same that we are handling hazmat-explosives. There still remains in the back of my head, what if. What else can i add to make this more safer. I am looking for ideas what would you have in your reloading station to make it more safer, in addition to gloves and safety glasses. So far I got my list started. a. Fire extinguisher b. Exit path out of the area c. Apron vest d. Face shield Appreciate any advise. Does the face shield include a helmet? Never know after an explosion where those falling debris will land. Link to comment Share on other sites More sharing options...
Dirty Rod Posted June 30, 2012 Share Posted June 30, 2012 (edited) Does the face shield include a helmet? Mine does. I feel perfectly safe in my reloading gear. Edited June 30, 2012 by Dirty Rod Link to comment Share on other sites More sharing options...
goldfish Posted June 30, 2012 Author Share Posted June 30, 2012 Don't position flourescent lights directly above your loader. If in the unlikely event you set the primers off, the follower rod will launch upward. Set lights off to either side by 12-18" so you don't have to clean up broken glass; Far more hazardous than anything else. Thank you. I had this considered when I first setup my station. I'll add your suggestion to the list. I had my light out of the primer tube path and the light is in an acrylic case. A buddy of mine had the whole primers in the tube detonate and shot the follower rod upwards. I am still trying to figure out what to add to prevent the follower rod if it gets launched upwards from bouncing back. Link to comment Share on other sites More sharing options...
goldfish Posted June 30, 2012 Author Share Posted June 30, 2012 Sorry, but I can't resist - it's either "safer" or "more safe". "More safer" is really poor grammar. FWIW, I have always worn safety glasses when reloading but that's about it. For that matter, I always wear safety glasses when I'm doing most things in my work area. And there is already a fire extinguisher and a sink there, both of which are worth having in any workshop. I have an apron in my workshop but have never seen a need for it while reloading - I don't have any nails or screws or tools to put in it. The one thing not on your list which is often overlooked is good lighting. The most dangerous work area I can imagine starts by being poorly lit. Basically, having spent 20yrs working in medical labs around really dangerous stuff, I've just developed some good habits which I follow to this day. Sorry for the bad grammar, its been a long day. Good lighting is a must. There is thread about led lighting for the shell plate area, i am currently working on this upgrade. Link to comment Share on other sites More sharing options...
goldfish Posted June 30, 2012 Author Share Posted June 30, 2012 Have someone else reload for you, off site. Also known as buying ammo. I use to buy ammo and there were squibs. Can you trust them? Will they work better for my toys? Link to comment Share on other sites More sharing options...
John Wayne Posted July 2, 2012 Share Posted July 2, 2012 Well...since we're on the subject of safety. What is it about these blue machines that makes women really h-----. Seriously. Link to comment Share on other sites More sharing options...
John Wayne Posted July 2, 2012 Share Posted July 2, 2012 I forgot...One thing I demonstrate to new reloaders is to burn a bottlecap full of powder (outside of course). People think powder is an explosive and expect it to blow up. Link to comment Share on other sites More sharing options...
retarmyaviator Posted July 3, 2012 Share Posted July 3, 2012 Have someone else reload for you, off site. Also known as buying ammo. I use to buy ammo and there were squibs. Can you trust them? Will they work better for my toys? If you are that paranoid you may want to consider another hobby. Link to comment Share on other sites More sharing options...
rodell Posted July 3, 2012 Share Posted July 3, 2012 Don't bust the OP too badly. Thinking about safety isn't paranoia. Not loading without going to extreme is! Link to comment Share on other sites More sharing options...
retarmyaviator Posted July 3, 2012 Share Posted July 3, 2012 Don't bust the OP too badly. Thinking about safety isn't paranoia. Not loading without going to extreme is! The OP passed into paranoia several posts back. Afraid of reloading, afraid of factory ammunition, where does it end? Link to comment Share on other sites More sharing options...
Aglifter Posted July 3, 2012 Share Posted July 3, 2012 The eye glasses are a requirement, IMO. Anti-static mats, and a fire extinguisher cannot hurt, and don't cost much - I would think it especially beneficial if its also an anti-fatigue mat. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now