zipper046 Posted May 10, 2012 Share Posted May 10, 2012 Just installed the Zev Tech competition spring pack (safety plunger spring, firing pin spring, trigger spring) and their newest connector. Feels good. Not as light as my other trigger was (homemade job with some Vanek parts), but the Zev Tech is smooth, consistent, with a sharp/clean break and short reset. Very nice so far. Z- Link to comment Share on other sites More sharing options...
Noximus03 Posted May 10, 2012 Share Posted May 10, 2012 Cha.....you think that feels good then you should try their complete trigger kit..... Link to comment Share on other sites More sharing options...
zipper046 Posted May 11, 2012 Author Share Posted May 11, 2012 Cha.....you think that feels good then you should try their complete trigger kit..... Which one do you use Noximus? I've gone round and round....Vanek trigger (which was awesome, but felt a bit "squishy"), homemade .25 cent job that was good, .25 cent job with LW ultimate overtravel stop ejector, and now this. trying not to go too light on the trigger...my PD has an 8# trigger on our issue G22's so don't want to stray TOO far from that and the muscle memory I've developed on that trigger. Z- Link to comment Share on other sites More sharing options...
Noximus03 Posted May 11, 2012 Share Posted May 11, 2012 Well, I run a variety of triggers on my Glocks, from GW, to Vanek, to GT.com. When I moved up to open I knew I wanted to have way less travel in both directions than I had. I also had the luxury of having 3 different brands already on hand. Ultimately, I ordered the drop in Fulcrum from Zev. That one also gave me an unintentional benefit as the trigger pad is wider that stock. If you are trying to maintain your pull weight, but remove/adjust the travel distance then take a hard look at the trigger bar they have up on their site. I'm not sure how far away it would take you from 8#'s, but it'll get the pre/over travel out. I've heard that the Vogel Carry trigger kit from Glocktiggers.com is pretty good, but I've never felt it. Hope the info helps, and thanks for doing what you do. Link to comment Share on other sites More sharing options...
Ub3RDoRK Posted May 11, 2012 Share Posted May 11, 2012 +1 for complete kit from GW with lightened striker. AMAZING I have them in 2 of my Glocks Link to comment Share on other sites More sharing options...
AustinL911 Posted May 12, 2012 Share Posted May 12, 2012 I run the same kit with finely polished everything, but had to go back to the stock trigger spring because the trigger absolutely would not reset 100%. It's still <3lb. with the stock trigger spring. I'm happy with it. I only wish I could get rid of some of the pre-travel. Link to comment Share on other sites More sharing options...
Blue Jacket Posted May 16, 2012 Share Posted May 16, 2012 I had the same experience as Austin. Had to put the stock trigger spring in because it wouldn't reset Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now