Jesse Tischauser Posted April 11, 2012 Share Posted April 11, 2012 I just picked up this sweet little compensatro from Miller Precision Arms. Looks like a winner. I'll let you know how it compared to the TITan, Rolling Thunder and whatever else I have in the safe. http://www.millerprecisionarms.com/html/products.html Link to comment Share on other sites More sharing options...
Unregistered Posted April 12, 2012 Share Posted April 12, 2012 The day I manage to order a Titan?! Argh! Link to comment Share on other sites More sharing options...
Jesse Tischauser Posted April 12, 2012 Author Share Posted April 12, 2012 This thing is very Titan ish except it's lacking the 3rd expansion chamber and the top ports are vectored to the rear. Link to comment Share on other sites More sharing options...
CraigS. Posted April 12, 2012 Share Posted April 12, 2012 Jesse - what is the length and diameter? it looks to be a light weight design. Link to comment Share on other sites More sharing options...
Jesse Tischauser Posted April 12, 2012 Author Share Posted April 12, 2012 Jesse - what is the length and diameter? it looks to be a light weight design. I'll measure it tonight and weigh it tomorrow. Link to comment Share on other sites More sharing options...
J.Schmitt Posted April 12, 2012 Share Posted April 12, 2012 That looks like it will throw alot of concusion back at the shooter. Let us know if that is the case. Jay Link to comment Share on other sites More sharing options...
carbon9 Posted April 12, 2012 Share Posted April 12, 2012 Keep us posted, looks like it might not throw quite as much gas back towards the shooter from the side ports like the Titan does but probably more from the top. Still looks promising and has to weigh less then the 5 or so ounces of a Titan. Link to comment Share on other sites More sharing options...
Jesse Tischauser Posted April 12, 2012 Author Share Posted April 12, 2012 The length is 2.800" and the width is .995". Link to comment Share on other sites More sharing options...
Jesse Tischauser Posted April 12, 2012 Author Share Posted April 12, 2012 Looks like it weighs 5.4 oz. I have the weight of a rolling thu set and Titan on the same scale I just need to find the picture. Link to comment Share on other sites More sharing options...
Unregistered Posted April 16, 2012 Share Posted April 16, 2012 Any updates on how it works Jesse? Link to comment Share on other sites More sharing options...
Jesse Tischauser Posted April 17, 2012 Author Share Posted April 17, 2012 Any updates on how it works Jesse? It is super flat sitting in its box:). I am in the middle of my busy season at work in the greenhouse. By busy I mean we do 65% of our annual business in April. I haven't shot a round all month. I'll get it out for some testing in May. Link to comment Share on other sites More sharing options...
ccoker Posted April 27, 2012 Share Posted April 27, 2012 We have been running this comp for several months on several rifles My buddy tested directly against the Titan and preferred the miiller As we all know they are very personal We want to get a bunch of them together and conduct some back to back tests using perhaps a laser aimed at a target and a high speed camera Link to comment Share on other sites More sharing options...
Bear1142 Posted April 27, 2012 Share Posted April 27, 2012 That comp looks very familiar.....hmmm Erik Link to comment Share on other sites More sharing options...
GlockandRoll Posted April 27, 2012 Share Posted April 27, 2012 Thanks for the thread. I was - as far as I know - the 1st one to review it as Brandon is a friend. tacticalgunreview (dot) com/blog/2011/12/miller-precision-arms-hammerhead-muzzle-break/ What I think sets this thing appart is the negative egg shape of the baffles, much like a booster nozel for a rocket. Everything else has flat sides. We are planning on doing a fairly comprehensive test when we can gather all the comps to test. I have personally shot it against an SJC titan on the same rifle on the same day and can tell you from my personal experience the 4moa aimpoint dot doesnt move. The last AR15targets.com night match a shot, a few of my bullet holes were so close to gether they covered them with a single peice of tape and that has never happened before. It gives the other guys in your squad a headache.. but it doesnt bother me, becuase I am yelling "Get some... get some!!" while I'm running and gunning. Link to comment Share on other sites More sharing options...
GlockandRoll Posted April 27, 2012 Share Posted April 27, 2012 I've got a few hundred rounds through mine now, you can see the copper "patina" flows in the bowls in this pic... looks cool IMHO. Link to comment Share on other sites More sharing options...
dmshozer1 Posted April 27, 2012 Share Posted April 27, 2012 Thanks for the thread. I was - as far as I know - the 1st one to review it as Brandon is a friend. tacticalgunreview (dot) com/blog/2011/12/miller-precision-arms-hammerhead-muzzle-break/ What I think sets this thing appart is the negative egg shape of the baffles, much like a booster nozel for a rocket. Everything else has flat sides. We are planning on doing a fairly comprehensive test when we can gather all the comps to test. I have personally shot it against an SJC titan on the same rifle on the same day and can tell you from my personal experience the 4moa aimpoint dot doesnt move. The last AR15targets.com night match a shot, a few of my bullet holes were so close to gether they covered them with a single peice of tape and that has never happened before. It gives the other guys in your squad a headache.. but it doesnt bother me, becuase I am yelling "Get some... get some!!" while I'm running and gunning. How far were the targets and were they fast double taps? Makes a big difference! Link to comment Share on other sites More sharing options...
GlockandRoll Posted April 27, 2012 Share Posted April 27, 2012 The same distance and type of shooting that they were the other time I wasn't shooting the miller. Link to comment Share on other sites More sharing options...
Jesse Tischauser Posted April 27, 2012 Author Share Posted April 27, 2012 Better than a Titan? That's a BIG claim. Now I gotta install mine tonight. Link to comment Share on other sites More sharing options...
dmshozer1 Posted April 27, 2012 Share Posted April 27, 2012 The same distance and type of shooting that they were the other time I wasn't shooting the miller. I was not trying to be a smart ass. A fast double tap at 15 yds, cannot be compared to one at say 30yds. For instance, with my set up I can do 2" at 35 yds. At 15 yds, a paster will cover both shots. So, how far were you shooting to cover both shots with a paster? Link to comment Share on other sites More sharing options...
GlockandRoll Posted April 30, 2012 Share Posted April 30, 2012 Better than a Titan? That's a BIG claim. Now I gotta install mine tonight. Did you get it running? If so, what did you think? Link to comment Share on other sites More sharing options...
Deathtrap Posted May 9, 2012 Share Posted May 9, 2012 Looks like a 2 port Titan to me Link to comment Share on other sites More sharing options...
Jesse Tischauser Posted May 9, 2012 Author Share Posted May 9, 2012 Well I installed everything last night. I too thought it was a titan copy at first glance. Onvioiskybit is building off sevetal of the design features of the Titan. However Having the Titan and this comp side-by-side the MPA comp has smaller ports and more rearward angle. I didn't think a shorter two hole comp could stand a chance against my current favorite Titan but I think this is going to be interesting. I am letting the loctite dry today. I'll be shooting it tomorrow after work side-by-side on identical Stag Arms 3G 18" Rifle length has rifles. As a side note I installed a new clamp on Syrac Ordnance adjustable gas block in the gun. Damn those are nice! Link to comment Share on other sites More sharing options...
caz41 Posted June 17, 2012 Share Posted June 17, 2012 Any updates Jesse? Link to comment Share on other sites More sharing options...
wgj3 Posted August 15, 2012 Share Posted August 15, 2012 I'm interested in an update as well... Link to comment Share on other sites More sharing options...
Jesse Tischauser Posted August 15, 2012 Author Share Posted August 15, 2012 I'm interested in an update as well... Well I have my lower back together. Maybe soon I'll have the comp installed. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now