RayFromHouston Posted March 12, 2012 Share Posted March 12, 2012 I bought a Unit 1 from a member here and have it mounted on a Para frame that I also got from a member here... the conversion came with five (5) mags and 2 of them run 100% of the time with good ammo.. (I had a hell of a time getting the mags to "drop free" from the frame, but after about a hour with some files just smoothing edge of the mags... they ALL drop free now......) The other 3 mags are in need of tuning... I'm kind of blinkey to start bending the feed lips on 80.00 mags... is there anyone out there that "tunes" .22 Cal mags.....?????? Link to comment Share on other sites More sharing options...
bassochist Posted March 12, 2012 Share Posted March 12, 2012 bending feedlips on a plastic magazine??? Link to comment Share on other sites More sharing options...
RayFromHouston Posted March 13, 2012 Author Share Posted March 13, 2012 bending feedlips on a plastic magazine??? My mag's are steel with Aluminum spacers to will the wide body gap..... Link to comment Share on other sites More sharing options...
Ming the Merciless Posted March 13, 2012 Share Posted March 13, 2012 (edited) Before you start bending on the magazines, loosen the aluminum spacers and try slightly shifting the mag body in the spacers. Compare the mag body positioning in the working mags to the non-working mags. They seem to be very picky about height and angle. Edited March 13, 2012 by Ming the Merciless Link to comment Share on other sites More sharing options...
RayFromHouston Posted March 14, 2012 Author Share Posted March 14, 2012 Before you start bending on the magazines, loosen the aluminum spacers and try slightly shifting the mag body in the spacers. Compare the mag body positioning in the working mags to the non-working mags. They seem to be very picky about height and angle. I did that over the weekend... that was one of the things I had to do to get them "drop free"... Link to comment Share on other sites More sharing options...
bassochist Posted March 19, 2012 Share Posted March 19, 2012 bending feedlips on a plastic magazine??? My mag's are steel with Aluminum spacers to will the wide body gap..... ok i tought they only make plastic magazines. Link to comment Share on other sites More sharing options...
mbopp Posted March 21, 2012 Share Posted March 21, 2012 (edited) Look at the info on magazine adjustments and the tool used. This is for older Hi Standards but some stuff may cross over: http://home.roadrunner.com/~jbarta/otherstuff.html Edited March 21, 2012 by mbopp Link to comment Share on other sites More sharing options...
RayFromHouston Posted March 22, 2012 Author Share Posted March 22, 2012 Look at the info on magazine adjustments and the tool used. This is for older Hi Standards but some stuff may cross over: http://home.roadrunner.com/~jbarta/otherstuff.html Great.... thanks for the cool link... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now