Demetrio Posted January 6, 2012 Share Posted January 6, 2012 (edited) Hi, I have two CZ75s and the slides are just a little different from each other. On the newer one the top of the slide is plain, the dovetail for the rear sight is cut about 10 mm wide (measured at the base of the dovetail) and the front sight has a longitudinal dovetail too. The other pistol seems to be very old. The top of the slide is rounded, the dovetail for the rear sight is cut about 8.4 mm wide only and I have no idea how the front sight is fixed on the slide (I can see no any cut in the slide to insert the front sight in). I have a competition sight set installed on the newer one, that I use to shoot Production division. I would like to use the older CZ for training, but the original sight set installed on it is very weak, so I'd like to know if there is any sight set available out there for this specific pistol. Thanks for any help, Demetrio. Edited January 6, 2012 by Demetrio Quote Link to comment Share on other sites More sharing options...
eerw Posted January 6, 2012 Share Posted January 6, 2012 There is not. Most I have seen you will need to go to the expense of having something milled into the slide. Quote Link to comment Share on other sites More sharing options...
Demetrio Posted January 6, 2012 Author Share Posted January 6, 2012 There is not. Most I have seen you will need to go to the expense of having something milled into the slide. That's what I was afraid of... Thanks for the info, Demetrio. Quote Link to comment Share on other sites More sharing options...
.gif.53c483221c1b60d84bce93d42c5def5a.gif)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.