BlueOvalBruin Posted October 7, 2011 Share Posted October 7, 2011 The jacketed bullet might need more powder to make the same PF, but for 3gun there’s no PF so I wouldn’t worry too much about it. Definitely find a chrono though. If you were planning on shooting Pala tomorrow there might be a few folks with chronos (esp with Area2 coming up). If I’m shooting tomorrow I’ll have mine. Link to comment Share on other sites More sharing options...
60crewman Posted October 7, 2011 Author Share Posted October 7, 2011 I seen your name pop up on the oppc fourm. Did you shoot there lastnight? I was the dude with the funky looking glock. Just found out that i finished 1st lastnight too. For the first time shooting a red dot i am happy with that. Link to comment Share on other sites More sharing options...
ede Posted October 7, 2011 Share Posted October 7, 2011 depending on the mount you may need to lower the ejection port, and you might want to bevel a few edges on the mount, a modified ejector might also help, can't say here where to buy one, PM me if you want to know. i run 11# spring, maybe clip a coil or two. my loads are either HS-6 or power Pistol and 121 Montana Gold bullets. i have had a mag or two with extensions give me problems, not all of my mags just a couple, but more feed than ejection. Link to comment Share on other sites More sharing options...
60crewman Posted October 7, 2011 Author Share Posted October 7, 2011 The ejection port is lowered, I also installed a longer zev tech ejector and a non LCI extractor and 20% stiffer extractor spring i was shooting today and had about 4 FTE's out of 100 rds. the empty would be stuck sideways bullet hole facing up and out at about 45 degrees. Im going to the range right now and will try the mags without the extension. and also some remington 124gr hollow pts 6.6 auto comp 1.14-1.15 OAL. will see what happens. How often should i expect a FTE. I wonder what is considered normal.... Link to comment Share on other sites More sharing options...
Sarge Posted October 8, 2011 Share Posted October 8, 2011 How often should i expect a FTE. NEVER. Link to comment Share on other sites More sharing options...
Glockcomma Posted October 8, 2011 Share Posted October 8, 2011 For my STI 9mm I load 7.0gr AutoComp at 1.155 OAL, you will probably be loading to 1.145 OAL so you should be in the ball park. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now