VictoriousCA Posted November 29, 2015 Share Posted November 29, 2015 Link to comment Share on other sites More sharing options...
UFO Posted November 29, 2015 Share Posted November 29, 2015 Here's mine..... Link to comment Share on other sites More sharing options...
scottrallye Posted December 1, 2015 Share Posted December 1, 2015 My TS with a few mods. Man, looks great. I had a hell of a time finding people that had put a thumb rest on their TS, and now they are popping up like crazy. I've seen this one twice, which thumb rest is this? I'm running an IPSC Alex and this looks like it may be a better fit. Great job on your TS! Link to comment Share on other sites More sharing options...
scottrallye Posted December 1, 2015 Share Posted December 1, 2015 I never thought I would own four CZ's but here they are: So jealous. I am in love with my TS (I'm about 8 or 9k rounds through it) but I REALLY want to shoot open in 2016... so a Czechmate may be in my future. I assume you like yours? With all the stuff I have seen (and read) about STI's it's literally insane to me that more people aren't running CZ's. Their loss! Link to comment Share on other sites More sharing options...
scottrallye Posted December 1, 2015 Share Posted December 1, 2015 Freshly Black Nitrided CZ TS w/ Titanium Nitride Barrel and a bunch of other mods. Where'd you get your barrel done? Been wanting to do mine this winter but I don't have a local Ti coater. Link to comment Share on other sites More sharing options...
Avedis Posted December 1, 2015 Share Posted December 1, 2015 Freshly Black Nitrided CZ TS w/ Titanium Nitride Barrel and a bunch of other mods. Where'd you get your barrel done? Been wanting to do mine this winter but I don't have a local Ti coater. This was done at MG Precision Arms, Ive also had one done at Warfrog Industries. I'd recommend both. Link to comment Share on other sites More sharing options...
scottrallye Posted December 1, 2015 Share Posted December 1, 2015 My Tac Sport. Mile long list of work. All done myself. Has the comp hammer on it now too. Frame is Cerakoted Gunmetal Grey. Link to comment Share on other sites More sharing options...
scottrallye Posted December 1, 2015 Share Posted December 1, 2015 Link to comment Share on other sites More sharing options...
eerw Posted December 1, 2015 Share Posted December 1, 2015 very nice! Link to comment Share on other sites More sharing options...
Hennig Posted December 3, 2015 Share Posted December 3, 2015 My TS with a few mods. Man, looks great. I had a hell of a time finding people that had put a thumb rest on their TS, and now they are popping up like crazy. I've seen this one twice, which thumb rest is this? I'm running an IPSC Alex and this looks like it may be a better fit. Great job on your TS! Cheers buddy, Its the Advance Ratio XCEL Thumbrest - http://shop.pbaimports.com.au/handgun-parts/frame/advance-ratio-xcel-czechmate-tactical-sports-thumb-rest I wasnt nervous at all when I was drilling the frame ... Link to comment Share on other sites More sharing options...
11287 Posted December 4, 2015 Share Posted December 4, 2015 I never thought I would own four CZ's but here they are: So jealous. I am in love with my TS (I'm about 8 or 9k rounds through it) but I REALLY want to shoot open in 2016... so a Czechmate may be in my future. I assume you like yours? With all the stuff I have seen (and read) about STI's it's literally insane to me that more people aren't running CZ's. Their loss! I also run two 2011's in limited. Whats nice about the CZ's is it has about the same grip angle so going from one to the other is not too bad. I had a Glock 24 for a short time and had to get rid of it. The grip angle was completely different and going from one to the other was not good for my shooting. Link to comment Share on other sites More sharing options...
rancher5 Posted December 4, 2015 Share Posted December 4, 2015 Freshly Black Nitrided CZ TS w/ Titanium Nitride Barrel and a bunch of other mods. Where'd you get your barrel done? Been wanting to do mine this winter but I don't have a local Ti coater. This was done at MG Precision Arms, Ive also had one done at Warfrog Industries. I'd recommend both. Gorgeous gun there broSent from my SM-G920V using Tapatalk Link to comment Share on other sites More sharing options...
scottrallye Posted December 7, 2015 Share Posted December 7, 2015 Updated pics of my TS. Figured it was okay to post again as there are two threads going for CZ pics Tallied up just under 10k rounds on it since April 11, 2015 when I purchased it. I shoot limited division USPSA (A87873). Here's the list of mods: Stainless Guide Rod 14lb Recoil Spring (also have 12,13,15, not installed) Extended Firing Pin CZ 2075 Rami Firing Pin Spring CZC Comp Hammer CZC Fiber Optic Front Sight, 8.0mm x 1.5mm (also have 6.5mm, 7.5mm, and stock) LPA Adjustable Sights (Not Installed Currently) Holes drilled and tapped in frame in C-More Pattern w/IPSC Alex Thumb Rest (also have a *thumb rest [generic]*) CZC Extended Safety, Left Hand Side CZ UB Long-Finger/Large Hand Trigger, Silver CZC Non-staked reusable trigger pin CZC Aluminum Grips Thin, custom anodized black by CZC CZ USA Rubber Grips for bad weather (not installed) CZC Large Magwell, custom anodized black by CZC CZC 140mm Extended Aluminum Base Pads, 3 Black, 1 Silver CZC Extended Mag Spring CZC Mag Follower (Fit 21 rounds) Grip and Backstrap/Beavertail Reduction/texture removal Frame Cerakoted "Gunmetal Grey" Link to comment Share on other sites More sharing options...
Hennig Posted December 8, 2015 Share Posted December 8, 2015 My kingdom for a CZC extended safety Nice looking rig mate! Link to comment Share on other sites More sharing options...
scottrallye Posted December 8, 2015 Share Posted December 8, 2015 My kingdom for a CZC extended safety Nice looking rig mate! I arranged a back order with CZC (basically they just made an order for me that they sat on until they were in stock) back in mid Summer, and got it at the beginning of November. I guess the extended safeties are outsourced, and they had some kind of issue with their old manufacturer and had to start all over with a new company. They got it sorted out and started getting them in during October. Sounded like the first shipment mostly went to their own custom guns that were waiting on that part, so obviously those were at the top of the list, and by the second shipment they started shipping the individual part to customers on the back order list. It wouldn't hurt to shoot them an email about back ordering one so you can get one when they get another shipment. It literally would have been the first mod I did to my gun when I got it in April. It's absolutely worth the wait. Link to comment Share on other sites More sharing options...
MrRick Posted December 10, 2015 Share Posted December 10, 2015 My favorite 45 Link to comment Share on other sites More sharing options...
scottrallye Posted December 11, 2015 Share Posted December 11, 2015 My favorite 45 Very sexy. Link to comment Share on other sites More sharing options...
sray53txtn Posted December 17, 2015 Share Posted December 17, 2015 (edited) Edited December 17, 2015 by Rinoray53 Link to comment Share on other sites More sharing options...
mura Posted December 19, 2015 Share Posted December 19, 2015 (edited) Greetings from Austria! Edited December 19, 2015 by mura Link to comment Share on other sites More sharing options...
rancher5 Posted December 19, 2015 Share Posted December 19, 2015 Greetings from Austria! Welcome, nice,pic's a little small, it looks like custom carved grips,very cool, Are they wood carved or what?Sent from my SM-G920V using Tapatalk Link to comment Share on other sites More sharing options...
mura Posted December 19, 2015 Share Posted December 19, 2015 (edited) Welcome, nice,pic's a little small, it looks like custom carved grips,very cool, Are they wood carved or what? Sent from my SM-G920V using Tapatalk Hello, I try and resize the picture. The grips are Nill Grips Made in Germany and yes they are from Wood! They are very comfortable. http://www.nill-griffe.com/Products_23.html Edited December 19, 2015 by mura Link to comment Share on other sites More sharing options...
adamge Posted December 19, 2015 Share Posted December 19, 2015 mura, what model CZ is that? Appears to be a 75 with a SA trigger and a long slide. Link to comment Share on other sites More sharing options...
mura Posted December 19, 2015 Share Posted December 19, 2015 mura, what model CZ is that? Appears to be a 75 with a SA trigger and a long slide. It is a CZ 75 SP01 Shadow Viper. It is a normal 75 SP01 with a 6Inch Slide from Waffen Oschatz in Germany, Waffen Oschatz is one of the best Gunmakers for CZ in the Region Germany, Austria and Switzerland! My CZ has the 6Inch Slide, Match Sights, SAO Trigger, a long Guide Rod for the Slide Spring and the Nill Grips. http://www.waffen-oschatz.de/cz-75-sp01-shadow-viper/ Link to comment Share on other sites More sharing options...
rancher5 Posted December 20, 2015 Share Posted December 20, 2015 mura, what model CZ is that? Appears to be a 75 with a SA trigger and a long slide. It is a CZ 75 SP01 Shadow Viper. It is a normal 75 SP01 with a 6Inch Slide from Waffen Oschatz in Germany, Waffen Oschatz is one of the best Gunmakers for CZ in the Region Germany, Austria and Switzerland! My CZ has the 6Inch Slide, Match Sights, SAO Trigger, a long Guide Rod for the Slide Spring and the Nill Grips. http://www.waffen-oschatz.de/cz-75-sp01-shadow-viper/ Truly awesome, CZ ,Tangfolio's are excellent pistols, with so many Mods available, sure like those grips of yoursSent from my SM-G920V using Tapatalk Link to comment Share on other sites More sharing options...
bowenbuilt Posted December 23, 2015 Share Posted December 23, 2015 My next project... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now