Magnus DUX Posted August 24, 2011 Share Posted August 24, 2011 Great build. Please measure your trigger pull if you have a chance. How does recoil feel compared to that Tanfoglio? Link to comment Share on other sites More sharing options...
3-Gun Sweden Posted August 29, 2011 Author Share Posted August 29, 2011 (edited) Swedish Championships 2011 - Industripartner Open ** STAGE 12 ** Comstock Long Course 12 IPSC Targets, 6 plates and NS. Minimal rounds: 30 Maximum points: 150 Empty on the floor of the "catwalk". Barrel of the gun on the mark. Standing below stairs. Arms relaxed on side. Audible signal, end at last shot. On signal, engage targets as they appear. Free order, free style. A lot of DQs on this stage... Link to video, another shooter with headcam DVC Edited August 29, 2011 by 3-Gun Sweden Link to comment Share on other sites More sharing options...
3-Gun Sweden Posted August 29, 2011 Author Share Posted August 29, 2011 And not sure why this thread was moved from OPEN to Glock factory? Link to comment Share on other sites More sharing options...
JKtruck150 Posted August 30, 2011 Share Posted August 30, 2011 You have taken some great pictures! Nice set-up you have there! Link to comment Share on other sites More sharing options...
Shelly76 Posted August 31, 2011 Share Posted August 31, 2011 I enjoyed your pics of your build from a stock Glock to a nice open pistol. Thanks for sharing. Link to comment Share on other sites More sharing options...
Flexmoney Posted August 31, 2011 Share Posted August 31, 2011 And not sure why this thread was moved from OPEN to Glock factory? Historically, all Glock questions were found in the Glock Forum...which preceded the "Factory/Production" forum area. I'd like to continue to keep them located together. - Admin. Link to comment Share on other sites More sharing options...
3-Gun Sweden Posted September 12, 2011 Author Share Posted September 12, 2011 (edited) Went competing again, managed new personal best. Target was to increase SPEED which I did - at cost! Lesson - don't top fill the magasine No, I didn't hit the NS. Scored 2 A's on the "swinger". You can see the 3rd pepper popper fall...but no...had to reshoot, plus lost the red point while shooting strong hand, which was devastating to the total score. Edited September 12, 2011 by 3-Gun Sweden Link to comment Share on other sites More sharing options...
3-Gun Sweden Posted September 12, 2011 Author Share Posted September 12, 2011 Link to comment Share on other sites More sharing options...
3-Gun Sweden Posted September 12, 2011 Author Share Posted September 12, 2011 Link to comment Share on other sites More sharing options...
3-Gun Sweden Posted September 12, 2011 Author Share Posted September 12, 2011 Various... Link to comment Share on other sites More sharing options...
3-Gun Sweden Posted September 12, 2011 Author Share Posted September 12, 2011 Link to comment Share on other sites More sharing options...
Rodan Posted September 14, 2011 Share Posted September 14, 2011 Nice post +1 Link to comment Share on other sites More sharing options...
n1guess Posted September 21, 2011 Share Posted September 21, 2011 how is running that dot on the slide....dont you loose sight picture more than the frame mount dot?? Link to comment Share on other sites More sharing options...
3-Gun Sweden Posted September 21, 2011 Author Share Posted September 21, 2011 how is running that dot on the slide....dont you loose sight picture more than the frame mount dot?? Nothing I notice. Works just fine for me, and I get the dot closer to the gun. Link to comment Share on other sites More sharing options...
3-Gun Sweden Posted October 12, 2011 Author Share Posted October 12, 2011 Tried some new ammo, S&B 9x19 FMJ and it works well. Only had time for two series before it got dark Two handed 47/50. One handed, strong hand 44/50 Link to comment Share on other sites More sharing options...
Bansheex Posted November 20, 2011 Share Posted November 20, 2011 Were did you get the slide racker for the glock? Link to comment Share on other sites More sharing options...
3-Gun Sweden Posted January 17, 2012 Author Share Posted January 17, 2012 Were did you get the slide racker for the glock? It's from FAB Defense. Link to comment Share on other sites More sharing options...
sarpau Posted January 17, 2012 Share Posted January 17, 2012 This is a great thread and a great looking glock. Have you had a chance to measure the final trigger pull weight yet? I'm in the process of putting together an open glock and will actually be trying out many of the same parts you have used. Having gone through it now, would you change anything? I'm thinking of going with a SJC comp vs the one that comes with the KKM barrel. Thanks for the inspiration Paul Link to comment Share on other sites More sharing options...
Hellstriker Posted January 20, 2012 Share Posted January 20, 2012 (edited) I would like to add my admiration and compliments to the many that have already been expressed towards the superb documentation and photography that accompany this thread posting. I have a question for anyone out there reading this thread. I have just purchased the KKM Glock Precision Barrel with the 4 port comp for my Glock Gen 4 G35 and am thinking that my next most important / essential upgrade will be the ZEV Tech Fulcrum Trigger Ultimate Kit. What do you all think? Edited January 20, 2012 by Hellstriker Link to comment Share on other sites More sharing options...
Ian_ Posted January 23, 2012 Share Posted January 23, 2012 Great thread! Thanks for sharing and having a great eye for photos! Link to comment Share on other sites More sharing options...
noexcuses Posted January 23, 2012 Share Posted January 23, 2012 great thread and pics Link to comment Share on other sites More sharing options...
dmwphoto Posted January 31, 2012 Share Posted January 31, 2012 thanks for all the detailed info and images. You have inspired me to do a similar build on a G35. I will put up another thread on that. Link to comment Share on other sites More sharing options...
aeropb Posted February 17, 2012 Share Posted February 17, 2012 I like this thread! Link to comment Share on other sites More sharing options...
thebridge Posted March 4, 2012 Share Posted March 4, 2012 That's one fine looking short smoke pole!! Building one for myself. Thanks for the inspiration Link to comment Share on other sites More sharing options...
3-Gun Sweden Posted March 7, 2012 Author Share Posted March 7, 2012 (edited) Thanks everyone! Over 13,400 views, I'm impressed I haven't looked here in a while, and frankly I've been focusing on IPSC Rifle and Shotgun plus it's winter here and freezing cold. But the sun is starting to warm and I have an itch to compete again. Sorry I haven't been able to measure the trigger pull. The reason for this is the club only has a limited set of weights so the reading isn't going to get exact anyway. I think perhaps 1.3-1.5 kgs? IPSC Rifle, JP CTR-02 18" Edited March 7, 2012 by 3-Gun Sweden Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now