OPENB Posted April 25, 2011 Share Posted April 25, 2011 I have a 9 major open gun with a 5.5" KKM barrel with a Bedell Ti comp in a 5" Infinity slide. It is a standard round top slide. I have had some ejection problems in the past, so I am trying the Delta Point in an Arredondo mount. If I decide to go back to a Cmore, which of the currently available 90* mounts will work with my round top slide? I've read some are more forward, some are lower, etc. The gun is already chromed, so machining the slide is not an option now. Link to comment Share on other sites More sharing options...
rishii Posted April 25, 2011 Share Posted April 25, 2011 I've got a quinn II, plenty of clearance for a round top slide a buddy has a cheely and it is a bit lower Link to comment Share on other sites More sharing options...
Sumtoc Posted May 2, 2011 Share Posted May 2, 2011 I had an STI regular round top slide on my first open gun, Quinn II mount. It was very close and I started noticing a faint rub mark on the slide where the scope was hitting it. Probably more like brushing it when everything was flexing. Didn't seem to affect the operation of the gun but I had it flat topped when I got the slide lightened, had to be re-chromed anyway..... Link to comment Share on other sites More sharing options...
Aircooled6racer Posted May 2, 2011 Share Posted May 2, 2011 Hello: I use the Quinn II on my open 9mm pistols. If the holes are in the correct spot it should be fine. Thanks, Eric Link to comment Share on other sites More sharing options...
HI5-O Posted May 2, 2011 Share Posted May 2, 2011 Hello: I use the Quinn II on my open 9mm pistols. If the holes are in the correct spot it should be fine. Thanks, Eric There's one for sale now on the classifieds. Link to comment Share on other sites More sharing options...
lcs Posted May 2, 2011 Share Posted May 2, 2011 I have a 9 major open gun with a 5.5" KKM barrel with a Bedell Ti comp in a 5" Infinity slide. It is a standard round top slide. I have had some ejection problems in the past, so I am trying the Delta Point in an Arredondo mount. If I decide to go back to a Cmore, which of the currently available 90* mounts will work with my round top slide? I've read some are more forward, some are lower, etc. The gun is already chromed, so machining the slide is not an option now. Bob, I just mounted a Quinn II on a round top STI slide and had plenty of room. In the past, I found it is where the holes were drilled is the big factor. If the holes were drilled low on the frame, you could have a problem. I have two mounted if you want to measure mine. Larry Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now